REXNORD ZEP5208F flange bearing 4 holes

REXNORD ZEP5208F is a reference of flange bearing 4 holes, within Bearing housings. Request a quote for ZEP5208F via WhatsApp or email with the quantity you need; we respond promptly with the quote and equivalents.

REXNORD ZEP series 4-bolt flange mounted bearings are units that combine a bearing and its housing in a single assembly. This type includes part numbers such as ZEP5207F, ZEP9307F and ZEP9407F. Each part number has its own dimensions, and the ZEP prefix is part of the designation.

The four-bolt flange is bolted against a flat surface perpendicular to the shaft, such as the front of a machine, a frame or a closing plate. The four mounting points distribute the load and give the unit stable support. A mounted unit arrives as an assembly, which simplifies installation and replacement compared with assembling the bearing and housing separately.

Part numbers of this type start with ZEP, followed by four digits (5207, 6215, 9211, 9407, among others) and end in F. Do not confuse the ZEP prefix with similar ones: they change the unit. Since dimensions depend on the number, before replacing a unit it is best to have the shaft diameter and the distance between the flange holes on hand.

Before deciding, confirm the shaft diameter, the spacing of the mounting holes and the clearance around the unit. Load, rotation speed and ambient conditions also matter. With that data, choosing the correct part number is straightforward.

Install the unit on a flat, rigid, clean support, and check alignment with the shaft before final tightening. Tighten the bolts evenly and respect the torques specified by the manufacturer. Poor support or a misaligned shaft reduce bearing service life.

To request a quote, send us the full part number by WhatsApp or email, such as ZEP9307F, along with the quantity you need. A photo of the installed unit helps confirm it. We reply promptly, from Buenos Aires, Argentina.