Flange bearing 4 holes REXNORD ZBS5060MM

REXNORD ZBS5060MM is a flange bearing 4 holes reference, within Bearing housings. Request a quote for ZBS5060MM via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

Rexnord 4-bolt flange bearing housings are mounted units that combine an insert bearing with a square or round flange housing, designed to fix shafts to walls, sheets or structures. They are used when the shaft must be perpendicular to the mounting plane and the load combines radial with moderate axial thrust. MR Accesorios Industriales supplies this line as an official brand and advises you on choosing the correct variant according to the shaft diameter and the type of fixing.

The designation of these housings is read in blocks: the prefix ZBS identifies the flange housing family, the following four digits combine the shaft size and the insert type, and the suffix MM indicates the sealing variant and unit configuration. In the examples of the 2000 series, such as ZBS2080MM or ZBS2085MM, the central digits refer to the nominal shaft diameter and the insert bearing series; those of the 5000 series, such as ZBS5040MM or ZBS5055MM, follow the same logic with another dimensional base. To interpret each code, it is best to consult the manufacturer's equivalence table.

These housings appear in belt and roller conveyors, bucket elevators, mixers, blowers, centrifugal pumps and process equipment in food, chemical and aggregate treatment plants. In Argentina they are found in packaging lines, grain conveyor belts, mills and balanced feed plants. The 4-bolt flange allows mounting on folded sheet or profile structure, with the shaft coming out perpendicular to the fixing surface, which simplifies alignment in equipment where the housing is bolted to a frame.

To select the housing, start from the shaft diameter and the type of load: if radial predominates, a standard unit is enough; if there is axial thrust, it is best to verify the insert capacity. Sealing is key in environments with dust, water or washing: variants with contact seal and additional lip protect the lubricant better. During mounting, tighten the four bolts in a cross pattern and with a torque wrench to avoid deforming the flange, check that the shaft turns freely and grease the insert according to the duty cycle. A slight angular misalignment is absorbed by the bearing internal clearance, but it is best to correct it before start-up.

Rexnord and Link-Belt share nomenclature in many of their mounted housing lines, and several manufacturers offer equivalent units with their own codes. Interchangeability depends on the shaft diameter, the insert type, the distance between flange holes and the sealing. When requesting an alternative, provide the complete code and the working conditions: this way the load capacity and the type of fixing can be compared without the risk of mounting a unit that does not correspond.

If you need a Rexnord flange housing or a compatible alternative, write to us on WhatsApp with the ZBS code and the shaft size. At MR Accesorios Industriales we quote shortly and indicate the variant that best suits your equipment.

This description provides guidance on the product type. Check the configuration and dimensions of this reference.