Flange bearing 3 holes REXNORD ZB5035MM

REXNORD ZB5035MM is a flange bearing 3 holes reference, within Bearing housings. Request a quote for ZB5035MM via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The Rexnord ZB MM housing is a 3-bolt flange mounted bearing unit, designed to secure drive shafts directly onto a flat machine or structure face. The flange distributes the load across three points and allows the assembly to be mounted without machining a cylindrical housing bore. It is used in equipment where the shaft must sit perpendicular to the mounting plane and where alignment adjustment is possible. MR Accesorios Industriales supplies this Rexnord line in Buenos Aires, Argentina.

The ZB MM designation reads in parts: ZB identifies the flange housing family, the digits that follow indicate size and series, and the MM suffix distinguishes the mounting and sealing variant. In examples ZB5035MM and ZB6035MM, the first two digits refer to series 5000 or 6000, and the following digits to the shaft diameter the bearing accommodates. The 6000 series is the medium-duty section, while the 5000 series is a more compact construction. To choose, the full code is the governing data: pass it on exactly as it appears on the equipment.

These housings appear in belt and screw conveyors, bucket elevators, mixers, blowers and process lines in food, chemical and aggregate plants. In Argentina they are seen in sugar mills, water treatment plants, flour mills and material handling equipment. The 3-bolt flange simplifies mounting onto folded sheet metal or cast iron and leaves the shaft supported on a single plane, which is useful when access from behind is limited.

When selecting, check the shaft diameter, the distance between flange holes and the position of the grease nipple. Sealing is key: in dusty or wet environments, the variant with a lip seal and additional protection is preferable. Lubrication is done with consistent grease, without overfilling, and the bearing internal clearance must remain free. During mounting, seat the flange on a clean, flat surface, tighten the three bolts in a cross pattern and check shaft alignment before start-up.

Rexnord and Link-Belt share nomenclature across many mounted housings, and equivalences with other brands' lines are common. Interchangeability does not depend only on shaft diameter: total height, flange diameter, distance between holes and seal type must be compared. If the original code is not available, it can be replaced by a housing with equivalent performance, provided the mounting dimensions and load capacity match.

If you need the ZB5035MM, the ZB6035MM or another reference in the line, send the code by WhatsApp to MR Accesorios Industriales. We will quote it and, if applicable, indicate the compatible alternative. We also manufacture split plummer block housings and custom parts for equipment whose original spare part is no longer available. Write to us with the model or a photo of the part and we will reply shortly.

This description provides guidance on the product type. Check the configuration and dimensions of this reference.