REXNORD ZAS9208F flange bearing 4 holes

REXNORD ZAS9208F is a reference of flange bearing 4 holes, within Bearing housings. Request a quote for ZAS9208F via WhatsApp or email with the quantity you need; we respond promptly with the quote and equivalents.

Rexnord ZAS F series housings are four-bolt flange mounted units designed to support rotating shafts in equipment where the bearing sits in a fixed housing bolted to a structure. They are used in conveying, processing and plant machinery, and allow the shaft to be aligned with the mounting flange. MR Accesorios Industriales sells them in Buenos Aires, Argentina.

The designation of these housings combines letters and numbers that identify the series and the size. In the ZAS F series, the ZA prefix corresponds to the mounted unit family; the following digits indicate the nominal shaft diameter and the housing type. For example, ZAS2115F, ZAS2200F and ZAS2208F share the final letter F, which distinguishes the flange variant. With the full part number you can locate the unit in the catalogue and order it via WhatsApp.

These housings are used in belt conveyors, elevators, mixers, pumps, fans and packaging lines. In Argentina they are found in food plants, cement plants, cold storage facilities and grain warehouses, where the four-bolt flange simplifies mounting on sheet metal or structure. The housing protects the bearing and makes replacement easier without dismantling the whole piece of equipment. MR Accesorios Industriales sells them for different industries.

To choose correctly, take into account the shaft diameter, the type of load and the direction of the forces. The four-bolt flange provides stable support; it is advisable to check the alignment between the shaft and the mounting face to avoid stress. The sealing of the unit defines its behavior against dust, water or frequent washdowns. Lubrication must be the one indicated for the operating temperature and speed. If the housing works outdoors, consider additional protection.

As for equivalences, flange mounted housings are interchangeable between brands by shaft number, flange type and mounting dimensions. It is not enough for the part number to look similar: you have to compare the hole spacing, the shaft diameter and the sealing type. If you cannot find the exact reference, write to us with the part number or model you need and we will indicate the compatible alternative.

MR Accesorios Industriales sells the Rexnord brand as part of its bearing housing line. If you have the part number ZAS2115F, ZAS2200F or any other in the series, send it via WhatsApp along with a photo of the mounting if possible. That way we can quote the unit and advise you on installation. We answer technical inquiries from plants and workshops in Buenos Aires, Argentina, shortly.