Flange bearing 4 holes REXNORD KLFSS2E20

REXNORD KLFSS2E20 is a flange bearing 4 holes reference, within Bearing housings. Request a quote for KLFSS2E20 via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The 4-bolt flange bracket of the KLF-SS200 series is a wall-mounted bearing unit: the unit combines the cast iron housing with a self-aligning insert bearing and is fastened with four bolts onto a flat surface. It is used to support drive shafts where the load is perpendicular to the mounting plane, with simple alignment and quick shaft removal.

The designation is read in blocks: the letters identify the family and the housing type, and the numbers that follow indicate the shaft size and the construction variant. In the KLF-SS200 series, the example KLFSS2E20 shows that combination of letters and digits: the final numeric block defines the shaft diameter the unit takes, and the prefix distinguishes the flange bracket from other configurations in the same line. To choose, pass the complete code exactly as it appears on the drawing or on the equipment nameplate.

In Argentina these brackets appear in belt and roller conveyors, packaging lines, mixers, blowers, exhausters and process lines in food, chemical and aggregate processing. They are also seen in washing equipment and in areas where wall or structural sheet mounting simplifies shaft support. MR Accesorios Industriales carries the Rexnord brand and quotes the code you need on WhatsApp.

When selecting, take into account the radial and axial load the shaft receives, the direction of rotation and the environmental conditions. The sealing defines how much contamination or moisture the unit tolerates: in dusty or wet environments a more closed protection is advisable. Check the factory lubrication and the relubrication interval if the bracket has a grease fitting, the alignment of the four holes and the insert clearance before tightening the bolts, tightening in a cross and progressive pattern.

Cross-brand equivalences are resolved by number of holes, shaft diameter, distance between mounting centers and insert type, not by the commercial code. A flange bracket from another line can be interchanged if those dimensions and the shaft fastening system match. Send the code or the model that appears on the equipment and at MR we will indicate the compatible alternative from Rexnord or from another brand we carry.

If the bracket works on critical equipment, it is advisable to check the condition of the insert and the housing before replacing: uneven wear usually comes from misalignment or poorly distributed load. With the code KLFSS2E20 or whichever you have on hand, write to us on WhatsApp and we will quote you promptly.

This description provides guidance on the product type. Check the configuration and dimensions of this reference.