Flange bearing 3 holes REXNORD KLFBSS219

REXNORD KLFBSS219 is a flange bearing 3 holes reference, within Bearing housings. Request a quote for KLFBSS219 via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The KLFB-SS200 series 3-bolt flange bracket is a mounted bearing that combines an insert bearing with a triangular flange housing. It is used to support shafts in equipment where mounting is done on a flat surface, with the three mounting holes. MR Accesorios Industriales supplies this Rexnord line; if you need a specific size, send the part number via WhatsApp and we'll quote it.

The KLFB-SS200 series designation is read in parts: KLFB identifies the bracket type, a three-bolt flange; SS indicates that the insert is stainless steel, and 200 corresponds to the dimensional series of the insert bearing. The final numbers define the shaft size: for example, KLFBSS216 and KLFBSS219 are two different sizes within the same family. In all cases, the complete part number lets you locate the part without ambiguity.

These brackets are used in conveyors, mixers, agitators, pumps, fans and process lines where the shaft is supported on a plate or structure with a flange. Being stainless steel, they are a common option in food, chemical, pharmaceutical and water treatment industries, where cleanliness and corrosion resistance are important. In Argentina you'll find them in food, beverage and process plants that work with humidity or frequent washdowns.

To select the bracket, take into account the shaft diameter, the type of load and the alignment with the structure. The three-bolt flange allows fastening with screws and adjusting the position; it is advisable to verify that the mounting surface is flat and that the holes match. The insert's sealing protects against dust and humidity, and proper lubrication extends service life. If the equipment works with vibration, check the tightness of the screws and the concentricity.

Flange mounted bearings are available in different brands and lines, and interchangeability depends on the flange dimensions, the shaft diameter and the type of fastening. It is not enough for the series to be similar: you have to compare the drawings and tolerances. At MR Accesorios Industriales we'll indicate the compatible alternative if you send us the original part number or the mounting dimensions.

If you need to replace a 3-bolt flange bracket, write to us via WhatsApp with the part number KLFBSS216, KLFBSS219, KLFBSS220, KLFBSS222 or KLFBSS223, or with the model shown on the equipment's nameplate. We'll quote it shortly and, if needed, advise you on choosing the correct variant within the Rexnord line.

This description provides guidance on the product type. Check the configuration and dimensions of this reference.