Piloted flange bearing REXNORD FC-308-TE

REXNORD FC-308-TE is a piloted flange bearing reference, within Bearing housings. Request a quote for FC-308-TE via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

Rexnord FC-TE series housings are piloted flange units that house a mounted bearing and allow it to be fixed to a wall or vertical structure. The flange centers the unit in the housing and the perimeter holes secure it with bolts. They are used in equipment where the shaft must be perpendicular to the mounting surface, with simple alignment and accessible maintenance. MR Accesorios Industriales supplies this line in Buenos Aires, Argentina.

The FC-TE designation is read in two parts: FC identifies the four-bolt piloted flange family, and TE indicates the mounting and sealing variant. The middle number defines the size: for example, FC-207-TE and FC-211-TE share the series but change the shaft diameter and hole spacing. In practice, the complete code tells you which unit to order without ambiguity. Send the code exactly as it appears on the drawing or on the machine plate.

These housings appear in belt and screw conveyors, bucket elevators, mixers, blowers and process lines in food, chemical and aggregate plants. In Argentina they are found in milling equipment, screens and industrial ventilation systems. The piloted flange simplifies mounting on folded sheet metal or profile structures, and the housed bearing tolerates minor misalignments typical of welded frames.

To select, start from the shaft diameter and the radial and axial load of the equipment. Check the type of sealing according to the environment: dust, water or frequent washing require tighter seals. During mounting, rest the flange flat, tighten the bolts in a cross pattern and check that the shaft turns freely. Lubrication is done through the unit's grease fitting; use grease compatible with the original and do not mix different bases. Check the alignment before starting up.

Piloted flange units are available from several brands with their own nomenclatures. Equivalence is not defined only by shaft diameter: you must compare hole spacing, centering diameter, overall height and bearing locking type. That is why it is best to request a quote with the complete code and, if possible, with a dimensioned sketch. MR Accesorios Industriales tells you the compatible alternative when the original brand is not the one you are using.

If you need to replace an FC-TE housing, send the code by WhatsApp to MR Accesorios Industriales along with the shaft diameter and a photo of the mounting. With that data we will quote the unit and tell you the option that best suits your equipment. We can also advise you on sealing and lubrication so that the replacement lasts as long as the original.

This description provides guidance on the product type. Check the configuration and dimensions of this reference.