Pillow block bearing REXNORD EP2B-111-T

REXNORD EP2B-111-T is a pillow block bearing reference, within Bearing housings. Request a quote for EP2B-111-T via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

Rexnord EP2B and EP4B series housings are pillow block mounted bearing units, designed to support rotating shafts in industrial equipment. They are used when a robust base is needed to absorb radial loads and allow direct mounting onto metal structures or machine beds. MR Accesorios Industriales supplies these references in Buenos Aires, Argentina, and advises you on choosing the correct variant according to the shaft diameter and the type of mounting your equipment requires.

The designation of these housings is read in blocks: the initial letters indicate the family and the type of housing, while the numbers that follow identify the shaft diameter and the size. In the EP2B series, for example, the codes EP2B-107-T, EP2B-111-T and EP2B-115-T correspond to different shaft sizes within the same line. The final suffix T indicates a specific design variant, generally linked to the type of sealing or the housing material. The EP4B series follows the same logic but with a larger capacity body. To identify your housing, send us the full code shown on the part.

These pillow block housings are found in a wide variety of industrial applications in Argentina. They are seen in belt conveyors, bucket elevators, mills, mixers, centrifugal pumps and process equipment in food, chemical and aggregate processing plants. They also appear in machines for the wood and textile industries and in ventilation systems. Their design allows them to be mounted on profiles or base plates, with the shaft supported at two or more points. The choice between EP2B and EP4B depends on the load and the available space.

To select the right housing, take into account the shaft diameter, the expected radial and axial loads, and the environmental conditions. Sealing is key: in environments with dust, moisture or frequent washdowns, reinforced protection is advisable. Mounting requires proper alignment of the housings to avoid stress on the bearing, and lubrication must be the one specified by the manufacturer. Fastening to the base must be firm, with the bolts tightened to the recommended torque. If the equipment runs with vibration, periodically check the tightness and the condition of the seals.

Rexnord housings are interchangeable with other brands of pillow block mounted bearings that follow the same dimensional standard. When replacing a unit, verify that the shaft diameter, the center height and the distance between mounting holes match the original housing. In many cases, interchangeability between brands is direct, but it is always advisable to confirm the critical dimensions before mounting. If you have doubts, at MR Accesorios Industriales we will indicate the alternative compatible with your equipment.

If you have already identified the code of your Rexnord housing, send it by WhatsApp along with a photo or the main dimensions. At MR Accesorios Industriales we will quote you shortly and, if you need a variant that does not appear in the list, we will look for it or offer you the equivalent option. With more than 80 years in the market, we support Argentine industry with technical advice and maintenance products.

This description provides guidance on the product type. Check the configuration and dimensions of this reference.