Flange bearing 4 holes REXNORD EFB-211-TE

REXNORD EFB-211-TE is a flange bearing 4 holes reference, within Bearing housings. Request a quote for EFB-211-TE via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The EFB series 4-bolt flange housing is a mounted bearing with a flange housing, designed to secure the shaft to a wall or flat structure and support moderate radial and axial loads. It is used when the arrangement calls for a front support with four anchoring points and an insert bearing that comes pre-aligned and factory-lubricated. MR Accesorios Industriales supplies the REXNORD line in Buenos Aires, Argentina.

The EFB series designation reads in blocks: the letters identify the flange housing family, the central number defines the housing and insert bearing size, and the TE suffix indicates the sealing and locking variant of the insert. That is why codes such as EFB-107-TE, EFB-111-TE, EFB-115-TE, EFB-203-TE, EFB-207-TE, EFB-208-TE, EFB-211-TE and EFB-215-TE coexist in the same series: the size changes, not the flange geometry. To select, the complete part number is the governing data.

They are common in food and beverage plants, material handling, water treatment, pulp and paper, and in process lines where the shaft runs horizontally and there is little room for a pillow block. In Argentina they appear in conveyor belts, mixers, blowers, pumps and washing equipment, often in humid or dusty environments. The four-bolt flange allows mounting on existing sheet metal or structure and removing the assembly without dismantling the entire shaft.

When selecting, take into account the shaft diameter, the insert locking type and the sealing required by the environment: a dry, clean area is not the same as one with pressurized water or particulate material. Check the alignment of the mounting face and even tightening of the four bolts to avoid deforming the housing. Insert lubrication and internal clearance are controlled according to use; in high-temperature or high-speed applications, it is advisable to check the grease and the seal type.

Mounted housings are interchangeable between brands by shaft number and flange configuration, but hole dimensions, housing outside diameter and insert locking system can vary between manufacturers. Therefore, before replacing equipment, compare the complete part number and the hole layout. If the assembly comes from another line, at MR Accesorios Industriales we will indicate the compatible alternative from the EFB series.

To move forward, send us via WhatsApp the part number on the housing or on the equipment plate, for example EFB-207-TE, and we will quote it promptly. If you need an EFB series variant that is not listed, write to us with the model and shaft diameter: we will source it or propose the equivalent option. MR Accesorios Industriales, Buenos Aires, Argentina, more than 80 years supporting industry.

This description provides guidance on the product type. Check the configuration and dimensions of this reference.