Flange bearing 4 holes NTN ZUCFPL206

NTN ZUCFPL206 is a flange bearing 4 holes reference, within Bearing housings. Request a quote for ZUCFPL206 via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The NTN ZUCFPL series 4-bolt flange Y-bearing unit is a mounted bearing: it combines an insert bearing with a flange housing fastened with four bolts. It is used to support rotating shafts in equipment requiring a compact, self-aligning unit with simple mounting. MR Accesorios Industriales sells this line as a brand it carries, with more than 80 years of experience in industrial distribution in Buenos Aires, Argentina.

The designation ZUCFPL reads in parts: ZU identifies the housing series, CF indicates the 4-bolt flange and PL the sealing type and insert configuration. The numbers that follow correspond to the shaft diameter: for example, ZUCFPL204 and ZUCFPL204-12 share the same basic size, while ZUCFPL205, ZUCFPL205-16, ZUCFPL206, ZUCFPL206-18, ZUCFPL206-19 and ZUCFPL206-20 cover increasing diameters. The hyphenated suffixes indicate fit variants for inch shafts.

These housings are used in conveyors, belts, elevators, mixers, fans and process lines in food, chemical, textile and aggregate processing plants. In Argentina they are common in material handling equipment and in machines operating with moderate transmission shafts. The 4-bolt flange allows the unit to be fastened to a flat face and keeps the shaft aligned without the need to machine a special housing.

To select the housing, take into account the shaft diameter, the type of load (radial, axial or combined) and the environmental conditions. The insert sealing defines the protection against dust, water or process agents. During mounting, verify that the support surface is clean and flat, tighten the four bolts evenly and check shaft alignment. Lubrication of the insert bearing is done according to the manufacturer's recommendations for each application.

Y-bearing units with insert bearing from different brands are interchangeable if the flange dimensions, shaft diameter and locking type match. Series with metric and inch sizes may require minor adaptations. If you have the code from another brand or an unidentified part, send us the data and we will indicate the compatible equivalent. MR Accesorios Industriales also manufactures split plummer block housings and pulleys, and sells a broad line of bearings and mounting accessories.

To request a quote for the ZUCFPL housing you need, send us the complete code via WhatsApp. We will reply promptly with the information so you can move forward with your equipment. If you are looking for a variant not listed, write to us with the exact model and we will quote it.

This description provides guidance on the product type. Check the configuration and dimensions of this reference.