Flange bearing 4 holes NTN UELFC215D1W3

NTN UELFC215D1W3 is a flange bearing 4 holes reference, within Bearing housings. Request a quote for UELFC215D1W3 via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The 4-bolt flange bearing housing with NTN UELFC2 series insert bearing is an assembled unit that combines a cast iron housing with a UEL line insert bearing. It is mounted on the front face of machines and structures, with the shaft passing perpendicular to the mounting plane. It is used to support shafts in transmission, conveying and process equipment, where rigid fixing and good alignment are required. MR Accesorios Industriales sells this line in Buenos Aires, Argentina.

The designation of the UELFC2 series is read in parts: UEL identifies the insert bearing with set screws and sealing, FC indicates the 4-bolt flange housing, and 2 corresponds to the size. The suffixes appearing in the examples, such as D1 and W3, refer to sealing and housing configuration variants. The number after the series, for example in UELFC204-012D1W3, indicates the shaft diameter and, when it includes a hyphen, the measurement in inches. Thus, UELFC205-013D1W3 and UELFC205D1W3 share the same housing size but different shaft diameter. To choose, send the complete code or the shaft and flange measurements.

These housings are seen in belt conveyors, bucket elevators, mixers, mills, pumps and fans. In Argentina they are common in food, cement, chemical and agricultural plants, where an environment loaded with dust or humidity requires reliable sealing. The 4-bolt flange allows mounting on sheet metal or structure with four bolts, leaving the shaft perpendicular to the support plane. They are also used in old machines that need to replace an original housing without modifying the bedplate.

To select correctly, take into account the shaft diameter, the type of load (radial, axial or combined) and the environmental conditions. The sealing of the UEL insert protects against dust and splashes; if there is frequent washing, a variant with greater sealing is advisable. Mounting requires the flange to rest flat and the bolts to be tightened evenly to avoid deforming the housing. Lubrication of the insert is done through the built-in grease fitting; follow the frequency according to the duty cycle. Before starting, verify that the shaft turns freely and that the set screw is properly locked.

Regarding interchangeability, 4-bolt flange bearing housings with insert bearing are available from several brands with standardized dimensions. If you bring the code of another brand, we can cross-reference it by shaft dimensions, hole spacing and flange height. The NTN UELFC2 series is usually compatible with equivalent lines from other manufacturers, but it is advisable to confirm each case with the technical data sheet. At MR Accesorios Industriales we advise you so that the replacement is direct, without adaptations.

If you need a flange bearing housing with insert bearing, send us the code or shaft measurements via WhatsApp. We will quote you promptly and indicate the compatible alternative if necessary. We work with the NTN line and with the main brands on the market, and we can source the exact size you are looking for.

This description provides guidance on the product type. Check the configuration and dimensions of this reference.