Pillow block bearing NTN UCPL206-101D1

NTN UCPL206-101D1 is a pillow block bearing reference, within Bearing housings. Request a quote for UCPL206-101D1 via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The UCPL2 pillow block with NTN insert bearing is an assembled unit that combines a bearing unit with a cast iron housing for mounting on a flat base. It is used to support rotating shafts in equipment where simple fastening and a self-aligning bearing are required. MR Accesorios Industriales sells this line with the technical assistance to choose the correct part number according to shaft diameter and fastening type.

The UCPL2 designation reads as follows: UCPL identifies the pillow block with insert bearing, 2 corresponds to the dimensional series, and the number that follows —204, 205, 206— indicates the bearing size. The suffix D1 indicates a construction variant of the insert. In the examples, UCPL204D1 and UCPL205D1 are the versions with a cylindrical bore for metric shafts, while UCPL204-012D1 or UCPL205-100D1 carry the hyphenated suffix for inch shafts. With this data the part is identified unambiguously.

These pillow blocks appear in belt conveyors, bucket elevators, mixers, mills, packaging belts and filling lines. In Argentina they are found in food plants, cement plants, tanneries and agro-industrial facilities, where the environment often has dust, humidity or frequent washdowns. The UCPL2 series, due to its pillow block construction, is bolted to steel or concrete structures and allows the shaft to be aligned with normal mounting tolerances.

To select the pillow block, start from the shaft diameter and the fastening type: codes with a hyphen (204-012, 205-100) correspond to inch measurements, and codes without a hyphen (204, 205) to metric measurements. Check the insert sealing: some have a single lip seal or additional protection for dusty environments. During mounting, make sure the base is flat and free of stress, and lubricate the insert according to the operating conditions. The self-alignment of the bearing compensates for small deviations, but it does not replace good leveling.

NTN UCPL2 pillow blocks are interchangeable with other brands that use the same dimensional nomenclature, such as the UCP or UCPL series from different manufacturers. The key is to respect the shaft diameter, the distance between holes and the center height. If the part number you have does not match exactly, write to us on WhatsApp with the code or the measurement and we will quote the equivalent reference.

MR Accesorios Industriales sells the NTN line of pillow blocks with insert bearings. If you need the UCPL2 for equipment in operation, send the complete part number on WhatsApp and we will send you a quote shortly. We can also advise you if you have doubts about the metric or inch variant.

This description provides guidance on the product type. Check the configuration and dimensions of this reference.