Pillow block bearing NTN UCP202D1

NTN UCP202D1 is a pillow block bearing reference, within Bearing housings. Request a quote for UCP202D1 via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The UCP pillow block with NTN insert bearing is a mounted unit that combines a cast iron housing with a self-aligning, sealed insert bearing. It is used to support rotating shafts in transmission, conveying and process equipment, where a compact, alignable and easy-to-mount unit is required. MR Accesorios Industriales sells this line in Buenos Aires, Argentina, with more than 80 years of experience in industrial components.

The UCP designation reads as a pillow block with insert bearing. The number that follows indicates the size: the UCP2 series groups the lighter sizes and the UCP3 series the larger sections. Suffixes such as -008, -009 or -010 identify the shaft diameter in inches, while D1 indicates a construction variant of the insert. For example, UCP201-008D1 corresponds to a UCP201 housing with insert for an 8/8 inch shaft, and UCP204-012D1 to a UCP204 for a 12/16 inch shaft.

These housings are used in belt conveyors, bucket elevators, mixers, mills, centrifugal pumps, fans and packaging lines. In Argentine industry they appear in food plants, cement plants, paper mills, meatpacking plants and agricultural facilities, where the environment can be dusty or humid. The cast iron housing with flat base allows it to be fixed to metal or concrete structures, and the self-aligning insert absorbs small shaft misalignments.

To select the housing, verify the shaft diameter and the type of load: radial, axial or combined. The insert comes lubricated and sealed from the factory; in applications with dust or water, it is advisable to check the condition of the seals and the internal clearance. Mounting requires placing the base on a clean, flat surface, tightening the fixing bolts and securing the insert with the set screws. Periodic lubrication with quality grease and correct alignment extend the service life of the assembly.

UCP housings are interchangeable between manufacturers that follow the same standardized dimensions. If you have another brand's part number, we can indicate the compatible equivalent. We can also quote the exact size you need for your equipment. Write to us on WhatsApp with the part number or shaft measurements and we will reply shortly.

This description provides guidance on the product type. Check the configuration and dimensions of this reference.