Product page
Pillow block bearing NTN UCP-27⁄8M
- Manufacturer Part Number
- UCP-27⁄8M
- Brand
- NTNOfficial distributor
- Category
- Bearing housings
- Subcategory
- Y-bearing unit
- Series
- UCP
We respond promptly.
Request your quote via WhatsApp or email, with the quantity and time frame you need.
Can't find the exact model? Write to us with the part number or model you're looking for: we'll find it and quote it, even if it's not listed in the catalog.
Description
NTN UCP-27⁄8M is a pillow block bearing reference, within Bearing housings. Request a quote for UCP-27⁄8M via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.
The UCP pillow block with NTN insert bearing is a mounted pillow block unit that combines a bearing unit with a cast iron housing. It is used to support rotating shafts in equipment that requires simple mounting and self-alignment. MR Accesorios Industriales sells this line in Buenos Aires, Argentina, and advises you on choosing the right variant for your application.
The UCP designation reads as a pillow block unit with insert bearing. In examples such as UCP-17⁄8M, UCP-21⁄2M or UCP-23⁄4M, the number after the hyphen indicates the shaft size in inches, expressed as a fraction. The final M suffix indicates a specific housing and insert configuration, which remains constant in this series. Knowing these parts lets you quickly identify the unit you need.
These pillow blocks are used in conveyors, belts, agitators, mills, pumps, fans and agricultural or food machinery. In Argentina they are common in food plants, tanneries, ceramics plants and metalworking shops, where the environment may be humid or dusty. The cast housing and the insert seal provide a useful barrier for those conditions.
To select correctly, take into account the shaft diameter, the type of load and the environmental conditions. Verify that the housing is clean and free of burrs, and that the mounting surface is flat. During assembly, align the pillow block with the shaft and tighten the insert's set screws to the recommended torque. Insert lubrication usually comes from the factory; in service, follow the manufacturer's instructions for relubrication.
UCP units from different brands are interchangeable with each other when the series, shaft size and housing type match. If you bring us another brand's part number, we can tell you the compatible equivalent. We can also quote the exact size shown on your drawing or sample. Write to us on WhatsApp with the part number or dimensions and we will reply promptly.
MR Accesorios Industriales has more than 80 years in the industry and is an official distributor of NTN. If you need a UCP pillow block for your equipment, send us the part number or shaft size on WhatsApp and we will quote it.
This description provides guidance on the product type. Check the configuration and dimensions of this reference.
Dimensions
- Eje o agujero
- 2-7/8 in
Frequently Asked Questions
- What does the M suffix mean in the UCP designation?
- The M suffix identifies a construction variant of the housing and insert within the UCP series. It does not change the shaft size, which is indicated by the preceding fraction. If you have doubts, send us the full part number and we will confirm the configuration.
- How do I choose the UCP pillow block for my shaft?
- You need the shaft diameter in inches and the type of load. With that data we will tell you the corresponding UCP unit. If the shaft is worn or the application has a lot of vibration, let us know so we can guide you in the selection.
- Are UCP pillow blocks from other brands compatible?
- Yes, when the series, shaft size and housing type match. If you send us another brand's part number, we will tell you the NTN equivalent. We can also quote the exact size you need.