Take-up bearing NTN UCM209-60D1

NTN UCM209-60D1 is a take-up bearing reference, within Bearing housings. Request a quote for UCM209-60D1 via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The Y-bearing housing with NTN UCM2 insert bearing is a mounted assembly that combines a housing unit with an insert bearing, ready to install on transmission shafts. It is used to guide and support rotating shafts in industrial equipment, providing a compact solution with simple alignment. MR Accesorios Industriales sells this line for applications that require reliability and easy assembly.

The UCM2 series designation reads in blocks: UCM identifies the family of Y-bearing housings with insert bearing, the number that follows indicates the size of the insert bearing and the D1 suffix indicates sealing or configuration variants. For example, UCM208-50D1 corresponds to a housing for an insert bearing of the 208 series with a shaft diameter of 50 mm; UCM209-60D1 is similar but for a 60 mm shaft. These codes allow you to select the exact unit according to the shaft diameter and the type of fastening.

In Argentine industry, these housings are used in conveyors, packaging belts, mixers, mills, pumps and fans. They are common in food, cement, chemical and agro-industrial plants, where shafts with moderate radial loads and slight misalignments need to be supported. Their Y-bearing housing design makes mounting on metal structures easier and allows quick replacement during maintenance.

To select correctly, take into account the shaft diameter, the radial and axial load, and the environmental conditions. The sealing of the insert bearing protects against dust and moisture; verify the type of seal according to the environment. Lubrication may be permanent or require periodic greasing. It is essential to align the housing with the shaft and tighten the fastening screws to the recommended torque to prevent vibrations and premature failures.

Equivalences between brands are possible if the main dimensions and the type of insert bearing are compared. An NTN UCM2 housing can be interchanged with units from other brands that follow the same mounting standard, but always verify the fastening dimensions and the shaft diameter. For a safe equivalent, it is necessary to compare the original drawings or codes.

If you need a Y-bearing housing with NTN UCM2 insert bearing, message us on WhatsApp with the code or the shaft measurements. At MR Accesorios Industriales we will quote the exact reference and advise you so that the unit is compatible with your application. More than 80 years of experience in power transmission back us.

This description provides guidance on the product type. Check the configuration and dimensions of this reference.