Take-up bearing NTN UCL209-10D1

NTN UCL209-10D1 is a take-up bearing reference, within Bearing housings. Request a quote for UCL209-10D1 via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The NTN UCL2 series Y-bearing insert pillow block is a ready-to-install mounted unit, made up of an insert bearing with spherical outer ring and a cast iron housing that allows automatic alignment. It is used as a tension or return roller in conveyor belts, chains and belts, where the load is moderate and misalignments need to be compensated for. MR Accesorios Industriales sells this series in Buenos Aires, Argentina, with more than 80 years of experience in bearings and industrial accessories.

The designation of the UCL2 series is read in parts: UCL identifies the family of mounted take-up units, the 2 indicates the diameter series, and the numbers after the hyphen correspond to the shaft diameter in inches and a locking variant. For example, UCL204-10D1 is a unit for a 5/8" shaft, UCL204-20D1 for 3/4", UCL204-30D1 for 15/16" and UCL204-40D1 for 1". The suffix D1 distinguishes a version with a contact seal. The codes UCL205-10D1, UCL205-20D1, UCL205-30D1 and UCL205-40D1 follow the same logic for the 205 series.

These units are used in belt conveyors, bucket elevators, packaging lines, food industry machines and material handling equipment. In Argentina they are found in grain plants, meat processing plants, tanneries and plastics factories, where the environment may be humid or dusty. The cast iron housing with mounting base allows it to be fixed to the structure and, being a take-up unit, to absorb variations in belt or chain tension.

To select the correct unit, take into account the shaft diameter, the locking type (set screws or eccentric), the sealing required according to the environment and the expected radial and axial load. The insert bearing has a spherical outer ring that accommodates static misalignments; installation must ensure that the base is properly supported and the screws are well tightened. Lubrication is permanent from the factory, but in severe applications a relubrication plan should be considered.

Mounted units of this type are interchangeable between brands in terms of main dimensions and capacities, as long as the series and shaft diameter are respected. When replacing, compare the complete code, the locking type and the sealing. If you have the code from another brand, at MR Accesorios Industriales we will indicate the equivalent compatible with your equipment.

To request a quote for your NTN Y-bearing insert pillow block, send the complete code on WhatsApp to MR Accesorios Industriales. If you can't find the exact variant, write to us with the model or measurement you need and we will quote it promptly.

This description provides guidance on the product type. Check the configuration and dimensions of this reference.