NTN UCFC217-307D1 flange bearing 4 holes

NTN UCFC217-307D1 is a reference of flange bearing 4 holes, within Bearing housings. Request a quote for UCFC217-307D1 via WhatsApp or email with the quantity you need; we respond promptly with the quote and equivalents.

The NTN Y-bearing insert unit is a mounted round-flange unit with four bolt holes, designed to secure rotating shafts to flat structures. It is used in equipment that requires a compact, self-aligning support that absorbs minor misalignment. MR Accesorios Industriales sells this line in Buenos Aires, Argentina, in bearings and power transmission.

The series designation is read in parts: UCFC identifies the round-flange housing with insert bearing, the number that follows corresponds to the dimensional size, and the suffixes D1 and -0XX indicate sealing variants and shaft diameter. For example, UCFC201D1 is a housing for a 12 mm shaft, while UCFC201-008D1 specifies the diameter in inches (1/2"). The code UCFC202-010D1 combines the series with a particular shaft size. Knowing these suffixes lets you order the exact replacement.

These housings are used in conveyors, belts, agitators, blowers, pumps and agricultural or food-processing machinery. In Argentina, they are common in milling plants, meatpacking plants and packaging lines, where the flange mounting makes installation on sheet metal or angle iron easier. Their robust construction tolerates moderate radial and axial loads, and the insert with set screws allows quick adjustment on standard shafts.

To select the housing, check the shaft diameter and the mounting type. The insert seal (usually with a lip seal) protects against dust and moisture; in humid environments or where washdowns occur, adequate lubrication is advisable and the internal clearance should be checked. Installation requires aligning the four flange holes and tightening the insert set screws onto the shaft with the proper wrench, without striking the bearing.

NTN UCFC units are interchangeable with other brands that use the same dimensional nomenclature, such as SKF, FAG or NSK, as long as the shaft and hole dimensions match. When replacing, compare the full code and the critical dimensions; if in doubt, MR Accesorios Industriales advises you on choosing the correct equivalent. The UCFC series covers a range of metric and inch shafts to suit different applications.

If you need a Y-bearing insert unit for your equipment, write to us on WhatsApp with the code or shaft size. At MR Accesorios Industriales we quote the exact reference and tell you the compatible alternative if applicable. We handle technical inquiries from all over the country and ship promptly.