NTN UCF208-108D1 flange bearing 4 holes

NTN UCF208-108D1 is a reference of flange bearing 4 holes, within Bearing housings. Request a quote for UCF208-108D1 via WhatsApp or email with the quantity you need; we respond promptly with the quote and equivalents.

The NTN Y-bearing insert unit is a 4-bolt flange mounted assembly that combines a cast iron housing with a self-aligning insert bearing. It is used to support rotating shafts in equipment where rigid fastening to a flat surface is required, such as conveying machinery, agitators or transmission systems. MR Accesorios Industriales sells this line with the technical assistance you need to choose the correct part number for your application.

The UCF designation identifies a 4-bolt flange housing with an insert bearing. The numbers that follow indicate the size: UCF2 groups the metric shaft mountings of series 2, and UCF3 those of series 3, with higher capacity. The D1 suffix indicates a construction variant of the insert, and when a hyphen with three digits appears — for example UCF201-008D1 or UCF204-012D1 — those digits correspond to the inch measurement of the shaft. With the complete part number we quote exactly what you need.

These housings are found in belt conveyors, bucket elevators, mixers, centrifugal pumps, fans and packaging lines. In the Argentine market they appear in food plants as well as chemical plants, cement plants and metalworking workshops. The 4-bolt flange allows them to be mounted on sheet metal or angle iron structures, and the self-aligning insert absorbs small shaft misalignments. MR Accesorios Industriales sells them for replacement and for new projects.

To choose well, first look at the shaft diameter and the type of load: radial, axial or combined. Check that the flange has a bolt hole spacing compatible with your structure. The insert's sealing defines whether it works in a dusty or humid environment: some have a single lip seal or additional protection. Lubrication comes from the factory, but in service it is advisable to check the condition of the grease and the alignment of the flange before tightening the bolts. A stress-free mounting prevents deformation and extends bearing life.

If you are replacing an existing unit, the housing part number and the shaft diameter are the key data. UCF series from different brands are usually interchangeable in dimensions and holes, but the housing material or the type of sealing may vary. It can be cross-referenced by dimensions: shaft diameter, bolt hole spacing and overall height. Write to us on WhatsApp with those data and we will indicate the compatible alternative or quote the exact part number shown on your equipment.

Whether you need a UCF201D1, a UCF204-012D1 or any other reference in the line, at MR Accesorios Industriales we quote it for you shortly. Send us the complete part number or the measurements of your shaft and flange, and we will reply with the option that best suits your application.