NTN UCC209-111D1 cartridge bearing

NTN UCC209-111D1 is a reference of cartridge bearing, within Bearing housings. Request a quote for UCC209-111D1 via WhatsApp or email with the quantity you need; we respond promptly with the quote and equivalents.

The UCC housing with NTN insert bearing is a cartridge unit ready to mount: the bearing comes already inserted in the housing, with defined mounting dimensions. It is used to support rotating shafts in equipment where the housing seat is cylindrical and the assembly must be aligned and protected. MR Accesorios Industriales sells this line in Buenos Aires, Argentina, and quotes the part number you need via WhatsApp.

The UCC series designation is read in blocks. The letters UCC identify the cartridge housing with insert bearing. The first number after the letters indicates the size series: UCC2 is the light series and UCC3 the medium series, depending on the part number. The digits following the series number indicate the shaft diameter, and the suffix D1 corresponds to the insert design variant. For example, UCC201D1 and UCC201-008D1 are from the UCC2 series; UCC204-012D1 as well. In part numbers with a hyphen, the three digits after it express the diameter in inches. With that data the complete unit is identified.

These units are found in conveyors, belts, elevators, mixers, blowers and process lines. In Argentina they appear in food plants, cement plants, cold storage facilities, tanneries and maintenance workshops. The cartridge format allows mounting in machined cylindrical seats, with the shaft supported and the bearing protected. It is a practical solution when the housing must be recessed into a frame or a box and there is no room for a flange or a pillow block.

To choose correctly, take into account the shaft diameter, the type of load and the environmental conditions. The insert seal defines whether the unit withstands dust, water or frequent washdowns. Lubrication comes from the factory and should be checked according to the duty cycle. During mounting, verify that the seat is clean and has the correct tolerance, and that the shaft enters without blows. Alignment between units prevents stress on the insert and extends the life of the assembly. If the equipment runs with vibration, check the tightening of the set screws.

NTN UCC units interchange with other brands that use the same cartridge nomenclature and the same shaft dimensions. The key is to respect the shaft diameter, the insert locking type and the outer dimensions of the housing. If you bring the part number from another brand or an unidentified part, at MR Accesorios Industriales we tell you the compatible equivalent. You can also ask about the UCC2 or UCC3 series according to the size you need.

To request a quote, send us the complete part number or the shaft diameter and housing type via WhatsApp. We will send you the quote shortly. If you are looking for a variant you do not see, write to us with the exact model and we will quote it. MR Accesorios Industriales supports you in selecting the right unit for your equipment.