NTN SUCFL204-12 flange bearing 2 holes

NTN SUCFL204-12 is a reference of flange bearing 2 holes, within Bearing housings. Request a quote for SUCFL204-12 via WhatsApp or email with the quantity you need; we respond promptly with the quote and equivalents.

The SUCFL housing is a 2-bolt flange mounted bearing unit: a ready-to-mount unit that combines an insert bearing with a cast iron housing. It is fastened with two bolts and keeps the shaft aligned without the need to machine the support. It is used in equipment where movement is moderate and assembly needs to be simplified. MR Accesorios Industriales sells the NTN SUCFL series in Buenos Aires, Argentina.

The SUCFL designation is read in blocks: SU identifies the mounted unit line, C the housing type and FL the two-bolt flange. The number that follows indicates the size: the codes in the SUCFL series cover from small sizes up to the most common ones. When a hyphenated suffix appears, as in SUCFL204-12 or SUCFL205-16, the second number corresponds to the shaft diameter in inches. Thus, the same housing can be ordered for a metric or inch shaft.

These housings appear in belt conveyors, packaging lines, mixers, blowers, exhaust fans and filling lines. In Argentina they are seen in food plants, meat processing plants, tanneries, ceramics plants and in the metalworking sector. They are also chosen for irrigation equipment, mills and bucket elevators, where the support must sit firmly on a plate or structure and withstand the weather with the appropriate sealing.

To select the housing, start from the shaft diameter and the type of load: the SUCFL series covers light and medium applications. Check the insert sealing: versions with a contact seal are suitable for dusty or humid environments. During assembly, rest the flange on a flat surface, tighten the two bolts evenly and check shaft alignment before start-up. Lubrication is done through the insert channel, with the grease specified for the working temperature.

When looking for a replacement, keep in mind that each manufacturer names its flange units with its own letters. An equivalent housing may appear as UCFL, FY or similar, but the hole diameter, the center distance and the insert type change. That is why it is advisable to compare the actual housing and shaft dimensions, not just the code. If you bring the code from another brand or the unidentified part, at MR we will indicate the compatible alternative.

If you need the SUCFL housing for your equipment, send us the complete code or the shaft and housing dimensions via WhatsApp. At MR Accesorios Industriales we will quote it shortly. We can also advise you on the insert and sealing according to the working environment. Write to us with the model shown on the nameplate or on the old part and we will provide the exact reference.