Insert bearing NTN REL208

NTN REL208 is a insert bearing reference, within Bearings. Request a quote for REL208 via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The NTN REL2 series insert bearing is a ball bearing with a spherical outer ring and an extended inner ring, designed to be mounted in split plummer block housings and Y-bearing units. It is used in equipment where the bearing needs to be aligned and fixed onto a shaft, with built-in sealing to retain lubricant and block contaminants. MR Accesorios Industriales sells this series in Buenos Aires, Argentina, and helps you choose the correct variant for your application.

The REL2 series designation is read as REL followed by a three-digit number indicating the bearing size. For example, REL204 corresponds to a 20 mm bore, REL205 to 25 mm and REL206 to 30 mm. Additional numeric suffixes, as in REL204-012 or REL205-013, identify variants with special bore or width dimensions. The NTN REL2 series is characterized by its extended inner ring with set screws for shaft fixing, and a spherical outer ring that allows alignment in the housing.

These insert bearings are used in a wide variety of industrial applications in Argentina: belt conveyors, grain elevators, mixers, fans, pumps, equipment for the food, textile, woodworking and agricultural industries. They are common in processing plants, workshops and facilities where simple mounting and accessible maintenance are required. Their sealed design makes them suitable for environments with dust, moderate humidity and vibration, provided the appropriate seal is selected.

To select the correct insert bearing, take into account the shaft diameter, the type of load (radial, axial or combined), the rotation speed and the environmental conditions. The seal can be single or double contact, and some models incorporate an additional groove for a radial shaft seal. During mounting, check the alignment of the housing and the tightening of the set screws on the shaft; proper lubrication with lithium grease or similar extends service life. If the equipment operates with a lot of dirt, choose the variant with reinforced sealing.

Regarding equivalences, NTN REL2 series insert bearings can be interchanged with products from other brands that follow the same dimensional nomenclature, such as SKF, FAG, NSK or Timken, provided the bore, outside diameter and width dimensions match, as well as the fixing type. It is important to verify the sphericity angle of the outer ring and the location of the holes for the set screws. MR Accesorios Industriales advises you to find the appropriate equivalent reference.

If you need to request a quote for an NTN REL2 series insert bearing, write to us on WhatsApp with the part number or the size you are looking for. At MR Accesorios Industriales we quote promptly and indicate the variant that best suits your equipment. We can also advise you on the compatible housing and mounting accessories. More than 80 years of experience in the industrial sector back us up.

This description provides guidance on the product type. Check the configuration and dimensions of this reference.