Flange bearing 4 holes NTN MUCFPL207

NTN MUCFPL207 is a flange bearing 4 holes reference, within Bearing housings. Request a quote for MUCFPL207 via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The NTN MUCFPL series 4-bolt flange Y-bearing unit with insert bearing is a mounted assembly that combines a cast iron housing with a ball insert bearing, ready to be fastened to a flat surface with four bolts. It is used to guide rotating shafts in equipment requiring rigid, centered support, such as conveyor belts, agitators, pumps and process machinery. MR Accesorios Industriales sells this line in Buenos Aires, Argentina, with more than 80 years of experience in industrial distribution.

The designation MUCFPL reads as a family of flange housings with insert bearing: the letters M and U identify the mounted unit type, CF indicates the four-bolt flange and PL distinguishes the mounting variant. The numbers that follow — for example MUCFPL204, MUCFPL205, MUCFPL206 — indicate the insert bearing size. When a hyphenated suffix appears, such as MUCFPL204-12 or MUCFPL206-18, the second number corresponds to the shaft diameter in inches, an alternative to the base metric size.

These housings are chosen in food and beverage plants, water treatment, cement, mining and material handling. In Argentina they are commonly seen in belt conveyors, mixers, blowers, centrifugal pumps and packaging lines, where the shaft must be supported precisely and the flange allows firm mounting on sheet metal or structure. The series covers sizes from 20 mm to 30 mm shafts, with inch options for direct replacement.

To select the housing, take into account the shaft diameter, the type of load — radial, axial or combined — and the environmental conditions. The four-bolt flange offers greater stability than a pillow block and facilitates alignment. The insert bearing usually comes with contact sealing to retain lubricant and block dust and moisture. During mounting, make sure the support surface is clean and flat, and tighten the bolts in a cross pattern to avoid deformation.

As for equivalents, 4-bolt flange housings with insert bearing are available from different brands under their own nomenclatures. If you need to replace an existing assembly, the most practical approach is to compare the main dimensions — shaft diameter, bolt hole spacing and overall height — and the insert locking type. With that data, at MR Accesorios Industriales we can indicate the compatible alternative or quote the NTN code shown on your equipment.

If you already have the housing code, such as MUCFPL204-12 or MUCFPL206-20, send it via WhatsApp along with a photo of the part and the shaft dimensions. At MR Accesorios Industriales we will quote you promptly and advise you so that the mounting is aligned and correctly lubricated. We can also help you identify the variant if the housing has no visible marking.

This description provides guidance on the product type. Check the configuration and dimensions of this reference.