Flange bearing 3 holes NTN MUCFBL207-20

NTN MUCFBL207-20 is a flange bearing 3 holes reference, within Bearing housings. Request a quote for MUCFBL207-20 via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The NTN MUCFBL series Y-bearing unit with insert bearing is a 3-bolt flange mounted unit that combines an insert bearing with a cast iron housing. It is used to support rotating shafts in equipment where front fastening and self-alignment are required. MR Accesorios Industriales sells this line as an official NTN distributor for plants and workshops in Argentina.

The MUCFBL designation is read in blocks: MU identifies the NTN mounted unit family, CF indicates the 3-bolt flange housing type, BL defines the housing design and the final number indicates the shaft diameter. For example, MUCFBL204 and MUCFBL205 correspond to increasing metric sizes, while MUCFBL204-12 or MUCFBL206-18 use the hyphenated suffix to identify inch sizes. This logic lets you order the exact part number without ambiguity.

These housings appear in belt conveyors, mixers, fans, centrifugal pumps and packaging lines. In the Argentine market they are found in food plants, cement plants, tanneries and maintenance workshops that need to replace 3-bolt flange mounted units. The combination of insert bearing and cast iron housing simplifies mounting on sheet metal or steel structures and reduces intervention time.

To select the correct unit, take into account the shaft diameter, the insert fastening type (set screw or eccentric) and the environmental conditions. In dusty or humid environments, it is advisable to check the insert seal and the type of lubricant. Mounting requires supporting the flange on a flat surface, tightening the bolts in a cross pattern and checking shaft alignment to avoid axial loads. Periodic lubrication and adequate internal clearance extend the service life of the assembly.

Flange mounted units are available from different brands with their own nomenclature. If the customer brings another company's part number or an unidentified part, at MR Accesorios Industriales we will tell you the compatible alternative. Interchangeability depends on the housing dimensions, the shaft diameter and the insert type; therefore it is advisable to compare that data before replacing. It is not enough for the part number to be similar: dimensions and fastening must be verified.

If you need a quote for an NTN MUCFBL series Y-bearing unit with insert bearing, send the part number or the shaft size on WhatsApp. At MR Accesorios Industriales we will quote the exact reference and advise you so the unit works correctly in your equipment. Write to us and we will reply shortly.

This description provides guidance on the product type. Check the configuration and dimensions of this reference.