Flange bearing 2 holes NTN JELPFL205-015

NTN JELPFL205-015 is a flange bearing 2 holes reference, within Bearing housings. Request a quote for JELPFL205-015 via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The NTN JELPFL2 series Y-bearing insert unit is a two-bolt flange mounted unit: the cast iron housing and the insert bearing come assembled from the factory, ready to be fastened with two bolts. It is used to support rotating shafts in equipment where mounting is done on a flat face, with simple alignment and quick maintenance. MR Accesorios Industriales sells this line in Buenos Aires, Argentina, and quotes it by WhatsApp with the exact part number.

The series designation is read in blocks. JELPFL identifies the two-bolt flange unit with insert bearing, and the letters J and E indicate the insert type and its locking method. The 2 that follows is the housing series, and the final digits mark the shaft diameter: JELPFL201, JELPFL202, JELPFL203 and JELPFL204 are increasing sizes. When a hyphenated suffix appears, as in JELPFL201-008 or JELPFL202-009, that additional number distinguishes variants of the same basic size, for example the inch diameter or a particular insert design. Send the complete part number and we'll quote the exact reference.

These units are found in conveyors, belts, elevators, mixers, blowers and packaging lines. Also in washing equipment, the food industry, treatment plants and agricultural machinery, where the two-bolt flange allows mounting on sheet metal or structure with simple holes. In Argentina they are widely chosen to replace mounted units in equipment that works with drive shafts and needs a compact support, with good misalignment tolerance and easy replacement when the insert wears out.

To select correctly, start from the shaft diameter and the insert locking type: hyphenated suffixes change the diameter or the locking system, so do not omit them when ordering. Check the insert sealing according to the environment: dust, water or frequent washing call for tighter protection. During mounting, rest the flange on a flat, clean surface, tighten the two bolts in a cross pattern and check that the shaft turns without effort. Lubricate the insert according to the duty cycle and check alignment so the bearing does not work under strain.

Two-bolt flange mounted units are available from several brands with their own nomenclatures. Interchangeability is resolved by comparing shaft diameter, hole spacing, hole diameter and center height, not just the part number. If you bring an unidentified part or another brand's part number, we'll tell you the compatible equivalent and quote the option that best fits your equipment. To do that, send us a photo of the part and the shaft measurement.

If you are looking for a variant you do not see, write to us on WhatsApp with the part number or model you need and we'll quote it shortly. At MR Accesorios Industriales we have more than 80 years in the business and we advise you so the mounted unit fits your equipment without hassle.

This description provides guidance on the product type. Check the configuration and dimensions of this reference.