NTN HMK2015CV3 needle roller bearing

NTN HMK2015CV3 is a reference of needle roller bearing, within Bearings. Request a quote for HMK2015CV3 via WhatsApp or email with the quantity you need; we respond promptly with the quote and equivalents.

The NTN HMK series needle roller bearing is a radial needle roller bearing with a stamped outer ring and steel cage, designed to support high radial loads in reduced spaces. It is used in applications where the available radial section is limited and high load capacity is required, such as transmissions, pumps, compressors and agricultural machinery. MR Accesorios Industriales sells this series.

The designation of the HMK series is interpreted as follows: the letters HMK identify the series of needle roller bearings with a stamped outer ring. The numbers that follow indicate the main dimensions: the first two digits correspond to the bore diameter and the next two to the total width. For example, the part numbers of the HMK series indicate the bore diameter and the width in millimeters, according to the first two and the next two digits respectively. The CV suffixes and the final number indicate design variants, such as the cage type or the internal clearance, according to the manufacturer's coding.

These bearings are used in a wide variety of industrial applications in Argentina. They are found in transmission cases, water and oil pumps, compressors, electric motors, agricultural machinery, construction equipment and lifting systems. Their compact design allows reducing the housing size without sacrificing load capacity, which makes them ideal for confined spaces. In the automotive sector, they are used in manual transmissions and differentials. They are also present in the metallurgical, paper and food industries, where robustness and precision are critical.

To correctly select an HMK series needle roller bearing, it is essential to consider the radial load, the rotation speed and the environmental conditions. Assembly requires a shaft with adequate surface hardness and a tolerance that guarantees the correct fit; a slight interference fit on the shaft is generally recommended. Lubrication can be with grease or oil, depending on the speed and operating temperature. It is important to verify the alignment between the shaft and the housing to avoid unforeseen axial loads. The sealing of the assembly must protect against contaminants, since the needles are sensitive to the entry of particles.

Regarding equivalences and interchangeability, NTN HMK series needle roller bearings can be replaced by products from other brands that follow the same dimensional nomenclature. However, cage variants, internal clearance and tolerances may differ between manufacturers, so it is recommended to verify the complete part number and the technical specifications before substituting. MR Accesorios Industriales can advise you to find the alternative compatible with your application, ensuring the performance and durability of the assembly.

If you need to request a quote for an NTN HMK series needle roller bearing, write to us on WhatsApp with the part number or the measurements you require. At MR Accesorios Industriales we quote the exact part number or measurement you need and we will reply shortly. We are your reliable partner for industrial components.