Deep groove ball bearing NTN EC-6001JRXZZ

NTN EC-6001JRXZZ is a deep groove ball bearing reference, within Bearings. Request a quote for EC-6001JRXZZ via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The NTN EC-JRXZZ series deep groove ball bearing is a single row bearing that supports moderate radial and axial loads in both directions, with a stamped steel cage and seals on both sides. It is used in electric motors, pumps, fans, gearboxes and power transmission equipment where low friction and quiet running are required. MR Accesorios Industriales sells this NTN line in Buenos Aires, Argentina, with more than 80 years of experience in bearings and power transmission.

The EC-JRXZZ series designation is read in blocks: the EC prefix identifies the bearing design, the four-digit number that follows — as in EC-6001JRXZZ — corresponds to the dimension code of the 60 series, extra light section, and the JR and X suffixes indicate the cage type and the sealing. The two final Zs indicate that the bearing comes with metal shields on both sides, which retains lubrication and blocks dust ingress. To request a quote, send us the complete part number exactly as it appears on the part.

In Argentine industry, this type of bearing appears in low and medium power electric motors, centrifugal pumps, draft fans, conveyor belts, machine tools and packaging equipment. It is also found in agro-industrial applications and in maintenance workshops that replace bearings due to wear or noise. Its sealed construction makes it suitable for environments with dust or moderate humidity, where an open bearing would require frequent relubrication.

To select the correct bearing, take into account the shaft diameter, the housing and the type of load: the 60 series is extra light section and is chosen when radial space is limited. The ZZ seal is non-contacting, which reduces friction and allows higher speeds than a contacting seal. During mounting, check the alignment between shaft and housing, use suitable mounting tools and avoid striking the raceway. Lubrication is defined at the factory and does not require maintenance under normal service.

Interchange between brands is handled by designation system: a deep groove ball bearing with the same dimensions and equivalent suffixes from another brand can be interchanged, but it is advisable to verify tolerances, internal clearance and seal type before replacing. If the customer brings a part number from another brand or an unidentified part, at MR Accesorios Industriales we cross-reference it with the NTN line and indicate the compatible reference. We work with the actual nomenclature of each manufacturer.

If you need this bearing or a variant of the series, send the complete part number by WhatsApp to MR Accesorios Industriales. We will quote it promptly and, if the part number corresponds to another brand, we will indicate the compatible equivalent. We handle technical inquiries on bearings, housings and power transmission from Buenos Aires, Argentina, for the whole country.

This description provides guidance on the product type. Check the configuration and dimensions of this reference.