Flange bearing 4 holes NTN C(CM)-UKFC213AD1

NTN C(CM)-UKFC213AD1 is a flange bearing 4 holes reference, within Bearing housings. Request a quote for C(CM)-UKFC213AD1 via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The UKFC2 series Y-bearing unit with insert bearing is a four-bolt flange mounted unit: the cast iron housing and the insert bearing come assembled from the factory, ready to be fixed with four bolts. It is used to support transmission shafts in equipment where mounting must be quick and the shaft tolerates some misalignment. MR Accesorios Industriales sells this NTN line in Buenos Aires, Argentina, for machinery assembly and replacement.

The designation is read in blocks. UKFC indicates a four-bolt flange housing with a UK series insert bearing; the 2 that follows is the housing series, and the final number indicates the shaft size: thus, C(CM)-UKFC210AD1 and C(CM)-UKFC211AD1 are the same family in two different diameters, and the same applies to C(CM)-UKFC213AD1, C(CM)-UKFC215AD1, C(CM)-UKFC216AD1, C(CM)-UKFC217AD1 and C(CM)-UKFC218AD1. The suffix AD1 corresponds to the sealing and locking variant of the insert. Send the complete code and we will quote it.

These units appear in belt conveyors, bucket elevators, mixers, screens, centrifugal pumps, fans and packaging lines. In the Argentine market they are seen in food plants, cement plants, meat processing plants, tanneries and aggregate processing facilities, where the shaft rotates at moderate speeds and the environment carries dust or moisture. The four-bolt flange allows the unit to be fixed onto sheet metal or profile structures without machining the seat, which simplifies assembly and replacement in the plant.

To choose correctly, start with the shaft diameter and the radial load the equipment supports; then define the sealing according to the environment: in areas with water or frequent washing, the variant with reinforced seal is preferable. When mounting, rest the flange on a flat, clean surface, tighten the four bolts in a cross pattern and check that the shaft is not forced. The insert comes with its factory lubrication; in service, replenish grease according to temperature and working frequency. A slight angular misalignment is absorbed by the unit, but do not use it to correct a large alignment error.

Mounted units are ordered by the manufacturer's code, and different brands use their own nomenclatures for equivalent shaft sizes. If you bring an unidentified part, or another brand's code, we will indicate the compatible alternative with the size and flange type. At MR Accesorios Industriales we carry the NTN line and will quote the exact code or size you need. Send us the model, shaft diameter or a photo of the part via WhatsApp and we will reply promptly.

This description provides guidance on the product type. Check the configuration and dimensions of this reference.