NTN C(CM)-UKFC210SD1 flange bearing 4 holes

NTN C(CM)-UKFC210SD1 is a reference of flange bearing 4 holes, within Bearing housings. Request a quote for C(CM)-UKFC210SD1 via WhatsApp or email with the quantity you need; we respond promptly with the quote and equivalents.

The NTN Y-bearing with insert is a pre-assembled 4-bolt flange unit that combines a cast iron housing with a UKFC2 series insert bearing. It is used to support rotating shafts in equipment where quick mounting and simple alignment are required, such as conveyor belts, mixers, fans and agricultural machinery. MR Accesorios Industriales sells this line in Buenos Aires, Argentina.

The designation of these units is read in blocks. UKFC identifies the 4-bolt flange housing with a UK series insert bearing; the number that follows indicates the size of the insert and the shaft. The suffix SD1 corresponds to the sealing and locking variant of the insert. The UKFC2 series groups the medium-section sizes.

These units are chosen in food, beverage, cement, aggregate and water treatment plants, and in mobile agricultural equipment. In Argentina they appear in belt conveyors, bucket elevators, screens, mixers and blowers. The 4-bolt flange allows the unit to be fixed to a flat face of the frame and to center the shaft without additional machining. The insert tolerates slight misalignment, which simplifies mounting on welded structures.

To select the unit, check the shaft diameter and the distance between the flange holes. The UK insert is locked to the shaft with a taper sleeve and nut, which makes adjustment and removal easy without a press. The SD1 seal protects against dust and splashes; in environments with water or frequent washing, it is advisable to check the condition of the lips and relubricate according to the duty cycle. Alignment between units and periodic lubrication extend the life of the assembly.

NTN UKFC2 units are interchangeable with other brands that use the same flange and taper insert nomenclature. If the equipment has a unit from another brand, the replacement is defined by the complete part number: shaft diameter, flange type and locking system. MR Accesorios Industriales quotes you the exact part number and indicates the compatible alternative when the customer brings the part unidentified.

To move forward with the quote, send the part number on the nameplate or on the part via WhatsApp: for example, C(CM)-UKFC211SD1. With that information, MR Accesorios Industriales replies shortly with the corresponding unit. If you need several sizes for the same equipment, send the complete list and we will quote everything together.