NTN C(CM)-UKFC210AD1 flange bearing 4 holes

NTN C(CM)-UKFC210AD1 is a reference of flange bearing 4 holes, within Bearing housings. Request a quote for C(CM)-UKFC210AD1 via WhatsApp or email with the quantity you need; we respond promptly with the quote and equivalents.

NTN UKFC series 4-bolt flanged mounted bearings are units that combine a bearing and its housing in a single assembly. This type includes part numbers such as C(CM)-UKFC210AD1, C(CM)-UKFC213AD1 and C(CM)-UKFC218AD1. The middle number changes with each part number, and so do the dimensions.

The four-bolt flange is bolted against a flat surface perpendicular to the shaft, such as the front of a machine, a frame or a closing plate. The four mounting points distribute the load and give the unit stable support. A mounted unit arrives as an assembly, which simplifies installation and replacement compared with assembling the bearing and housing separately.

Part numbers of this type have the format C(CM)-UKFC followed by three digits (210, 211, 213, 215, 216, 217, 218) and the AD1 suffix. The C(CM)- prefix, UKFC, the number and AD1 make up the complete designation, and none of them should be omitted. The number identifies the unit size; the shaft diameter is confirmed with the full part number.

Before deciding, confirm the shaft diameter, the mounting hole spacing and the clearance around the unit. Load, rotation speed and ambient conditions also matter. With that data, choosing the right part number is straightforward.

Install the unit on a flat, rigid, clean support, and check alignment with the shaft before final tightening. Tighten the bolts evenly and respect the torques specified by the manufacturer. Poor support or a misaligned shaft reduce bearing service life.

To request a quote, send us the full part number via WhatsApp or email, such as C(CM)-UKFC213AD1, along with the quantity you need. A photo of the installed unit helps confirm it. We reply promptly, from Buenos Aires, Argentina.