Flange bearing 4 holes NTN ARFU-2S

NTN ARFU-2S is a flange bearing 4 holes reference, within Bearing housings. Request a quote for ARFU-2S via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The NTN ARFU housing is a 4-bolt flange mounted unit with an insert bearing, designed to secure rotating shafts to flat structures. It is used when the shaft must sit perpendicular to the mounting plane and carry moderate radial and axial loads. MR Accesorios Industriales sells this line for plants and workshops throughout Argentina.

The ARFU designation identifies NTN's series of 4-bolt flange housings. The number following the letters indicates the insert bearing size: for example, ARFU-2S corresponds to a housing for a 15 mm shaft, while other sizes in the ARFU series cover larger diameters. The S suffix indicates the insert sealing type, designed to retain lubricant and block contaminants. To choose, send the full part number or the shaft diameter.

These housings appear in belt conveyors, mixers, fans, packaging lines and process lines in food, chemical and materials plants. In Argentina they are seen in grain handling equipment, aggregate processing plants and maintenance workshops replacing worn units. The 4-bolt flange allows rigid fastening onto sheet metal or profile structures, with simple alignment relative to the shaft.

To select the housing, check the shaft diameter, the load type and the environmental conditions. The S seal is suitable where there is dust or splashing; if the environment is more aggressive, other protections should be evaluated. During mounting, seat the flange on a clean, flat surface, tighten the bolts in a cross pattern and check that the shaft turns without effort. The insert is lubricated according to the duty cycle and the grease specified for bearings.

NTN ARFU housings can be interchanged with 4-bolt flange units from other brands, provided the flange dimensions, shaft diameter and insert fastening system match. A similar part number is not enough: the drawings must be compared. If you have another brand's part number or an unidentified part, write to us and we will tell you the compatible equivalent.

If you need the ARFU housing for your equipment, send the part number or shaft size via WhatsApp to MR Accesorios Industriales. We will quote the exact reference and advise you so the unit is properly mounted and lubricated. We handle inquiries from all over the country and reply promptly.

This description provides guidance on the product type. Check the configuration and dimensions of this reference.