NTN AELP209-111D1 pillow block bearing

NTN AELP209-111D1 is a reference of pillow block bearing, within Bearing housings. Request a quote for AELP209-111D1 via WhatsApp or email with the quantity you need; we respond promptly with the quote and equivalents.

The NTN AELP2 pillow block is a mounted pillow block unit with insert, also called a split pillow block unit. It is used to support rotating shafts on flat structures, with two mounting holes in the base. The AELP2 series combines a cast iron housing with an insert bearing from the AEL line, which features an extended inner ring and set screws to secure the shaft. It is a robust, easy-to-mount solution for power transmission in industrial equipment.

The AELP2 series designation is read in parts: AELP identifies the pillow block assembly with insert bearing; the number that follows indicates the insert size and shaft diameter; the suffixes D1 and the numeric ones provide sealing and bore diameter variants. For example, AELP204-012D1 corresponds to a housing with a 3/4 inch insert, while AELP204D1 is the 20 mm version. In part numbers with a numeric suffix, that suffix indicates the bore diameter in inches. These differences are key when choosing the correct part number.

In Argentine industry, AELP2 pillow blocks are found in belt conveyors, bucket elevators, mixers, mills, packaging lines and process equipment. They are also used in the food, chemical and building materials industries, where mounting on flat structures simplifies maintenance. Because they are split units, they allow the insert to be replaced without completely disassembling the shaft, which reduces downtime in plants that operate continuously.

To select the AELP2 pillow block, take into account the shaft diameter, the type of load (radial, axial or combined) and the environmental conditions. The insert seal protects against dust and moisture; in environments with frequent washdowns, it is advisable to verify the seal type. Mounting requires aligning the base with the shaft, tightening the set screws on the inner ring and lubricating according to the duty cycle. Careful alignment extends bearing life and prevents vibration.

NTN AELP2 pillow blocks are interchangeable with other brands that use the same pillow block unit nomenclature, such as SKF, FAG, NSK or Timken, as long as the main dimensions and insert type match. When requesting a quote, indicate the full part number or the shaft dimensions and the distance between holes. If you have an unidentified part, send us a photo or the part number marked on the housing and we will tell you the compatible equivalent.

To request a quote for your NTN AELP2 pillow block, write to us on WhatsApp with the exact part number you need. At MR Accesorios Industriales we will quote it shortly and advise you so you choose the correct variant for your application. We also handle inquiries for special dimensions or orders for other series of housings and insert bearings.