Pillow block bearing NTN AELP205D1

NTN AELP205D1 is a pillow block bearing reference, within Bearing housings. Request a quote for AELP205D1 via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The NTN AELP2 series pillow block is a mounted pillow block with insert, also called a split housing unit. It is used to support rotating shafts on flat structures, with two mounting holes in the base. The AELP2 series combines a cast iron housing with an insert bearing from the AEL line, which features an extended inner ring and set screws to secure the shaft. It is a robust, easy-to-mount solution for power transmission in industrial equipment.

The AELP2 series designation is read in parts: AELP identifies the pillow block assembly with insert bearing; the number that follows, such as 204, 205 or 206, indicates the insert size and the shaft diameter; the suffixes D1 and -012 provide sealing and bore diameter variants. For example, AELP204-012D1 corresponds to a pillow block with a 3/4 inch insert, while AELP204D1 is the 20 mm version. In AELP205-100D1, the 100 suffix indicates a 1 inch bore diameter. These differences are key when choosing the right part number.

In Argentine industry, AELP2 pillow blocks are found in belt conveyors, bucket elevators, mixers, mills, packaging lines and process equipment. They are also used in the food, chemical and building materials industries, where mounting on flat structures makes maintenance easier. Because they are split units, they allow the insert to be replaced without completely disassembling the shaft, which reduces downtime in plants that run continuously.

To select an AELP2 pillow block, take into account the shaft diameter, the type of load (radial, axial or combined) and the environmental conditions. The insert seal protects against dust and moisture; in environments with frequent washdowns, it is advisable to check the type of seal. Installation requires aligning the base with the shaft, tightening the set screws on the inner ring and lubricating according to the duty cycle. Careful alignment extends bearing life and prevents vibration.

NTN AELP2 series pillow blocks are interchangeable with other brands that use the same pillow block unit nomenclature, such as SKF, FAG, NSK or Timken, as long as the main dimensions and the insert type match. When requesting a quote, indicate the full part number or the shaft dimensions and the distance between holes. If you have an unidentified part, send us a photo or the part number marked on the pillow block and we will tell you the compatible equivalent.

To request a quote for your NTN AELP2 series pillow block, write to us on WhatsApp with the exact part number you need, for example AELP206-101D1 or AELP205D1. At MR Accesorios Industriales we will send you a quote shortly and advise you so you choose the right variant for your application. We also handle inquiries about special dimensions or requests for other series of pillow blocks and insert bearings.

This description provides guidance on the product type. Check the configuration and dimensions of this reference.