Insert bearing NTN AEL202D1W3

NTN AEL202D1W3 is a insert bearing reference, within Bearings. Request a quote for AEL202D1W3 via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The NTN AEL2 series insert bearing is a ball bearing with a spherical outer ring and set screw locking system, designed to be mounted in split plummer block or solid housings. It is used in equipment where the shaft rotates and the housing remains stationary, and it compensates for small misalignments thanks to its convex outer surface. MR Accesorios Industriales sells this series in Buenos Aires, Argentina, with more than 80 years of experience in the industry.

The AEL2 series designation is read in blocks. The letters AEL identify the family of insert bearings with a spherical outer ring and set screw locking. The number that follows, as in AEL201 or AEL202, indicates the insert size. The suffix D1 indicates a specific sealing variant, and W3 corresponds to an execution with particular lubrication or protection characteristics. The examples AEL201-008D1W3, AEL202-009D1W3 and AEL204-012D1W3 show how the code combines the basic size with the shaft diameter in inches where applicable. To request a quote, send the complete code exactly as it appears on the equipment.

These inserts are used in belt conveyors, bucket elevators, mixers, mills, conveyor belts and agricultural machinery. In Argentina they are common in grain processing plants, feed lots, meat packing plants, tanneries and industrial facilities that need to replace bearings in split plummer block housings without disassembling the shaft. They are also used in fans, centrifugal pumps and process equipment where ease of mounting and periodic relubrication are important.

To select the correct insert, take into account the shaft diameter, the housing type and the working conditions. The AEL2 series supports moderate radial and axial loads. The D1 seal protects against dust and moisture; check that the lip is not damaged during mounting. The set screws must be tightened with the proper wrench and with thread locker if there is vibration. Lubrication is done through the outer ring channel; use grease compatible with the operating temperature. Before mounting, check the housing alignment and the condition of the shaft.

NTN AEL2 series insert bearings can be interchanged with equivalent products from other brands that follow the same dimensional standard. If the original part number is not available, it can be replaced by another with the same shaft diameter, width and locking type, as long as the housing is compatible. MR Accesorios Industriales advises you to find the right equivalent based on the housing and shaft dimensions. Do not invent part numbers: send us the old part number or the measurements taken with a caliper.

If you need this insert bearing, write to us on WhatsApp with the complete part number or the shaft and housing dimensions. At MR Accesorios Industriales we will quote you promptly and indicate the compatible alternative if necessary. We work with the leading brands on the market and have more than 80 years of experience in Buenos Aires, Argentina.

This description provides guidance on the product type. Check the configuration and dimensions of this reference.