NTN A-UC209-110D1M insert bearing

NTN A-UC209-110D1M is a reference of insert bearing, within Bearings. Request a quote for A-UC209-110D1M via WhatsApp or email with the quantity you need; we respond promptly with the quote and equivalents.

The NTN UC series insert bearing is a ball bearing with a spherical outer ring and set screws, designed to be mounted in split plummer block housings or bearing units. It is used in equipment requiring a simple, robust and easy-to-mount rotating unit, such as conveyors, fans or agricultural machinery. MR Accesorios Industriales sells this line in Buenos Aires, Argentina, in the industrial sector.

The UC series designation combines letters and numbers that identify the insert bearing. In examples such as A-UC201X-008D1M or A-UC205-013D1M, the prefix A indicates a catalogue variant, followed by UC which defines the series. The basic number (201, 202, etc.) indicates the bearing size, while the suffix X appears in some sizes and the numeric code after it specifies the shaft diameter in inches. The suffix D1M identifies sealing and design characteristics of the insert. To choose the correct code, take into account the shaft diameter and the type of housing where it will be mounted.

These insert bearings are used in a wide variety of industrial applications in Argentina. They are common in belt conveyors, bucket elevators, fans, mixers and equipment for the food, chemical and agricultural industries. They are also found in construction machinery and in transmission systems requiring an economical support with simple maintenance. Their design with a spherical outer ring allows small misalignments to be compensated when mounted in split plummer block housings or bearing units.

To select the right insert bearing, verify the shaft diameter and the type of locking (set screws, eccentric or adapter). Sealing is key: the D1M suffixes indicate specific protection against contaminants, suitable for dusty or humid environments. During mounting, ensure correct alignment and adequate lubrication; most of these bearings come pre-lubricated, but it is advisable to check the condition of the grease in severe applications. Locking to the shaft must be firm to prevent slipping.

As for equivalents, UC series insert bearings from different brands are usually interchangeable if the main dimensions and the type of locking match. When replacing a bearing, compare the complete code and the shaft and housing dimensions. If you have doubts, the technical team at MR Accesorios Industriales can help you identify the compatible alternative. Interchangeability between brands depends on tolerances and seal design, so it is advisable to verify the application before substituting.

To request a quote for the NTN UC series insert bearing you need, send the complete code on WhatsApp to MR Accesorios Industriales. If you cannot find the exact reference, write to us with the model or shaft dimensions and we will quote the corresponding option. We are in Buenos Aires, Argentina, and we handle technical inquiries from all over the country.