Take-up bearing NSK UKT213D1;HS2313X

NSK UKT213D1;HS2313X is a take-up bearing reference, within Bearing housings. Request a quote for UKT213D1;HS2313X via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The UKT take-up bearing housing with NSK insert bearing is a mounted unit that combines an insert bearing with a cast iron take-up housing. It is used to tension belts or chains in transmission systems, where the pulley or sprocket rotates on the bearing and the housing allows the tension to be adjusted. MR Accesorios Industriales sells this line in Buenos Aires, Argentina, with more than 80 years of experience in industrial components.

The UKT designation identifies the series of take-up bearing housings with insert bearing. In the examples UKT208D1, UKT209D1 and UKT213D1, the numbers 208, 209 and 213 indicate the size of the insert bearing, which in turn defines the shaft diameter. The D1 suffix indicates a construction variant of the insert. The HS series, such as HS2308X, HS2309X and HS2313X, corresponds to the insert bearing with its own nomenclature, where the digits refer to the diameter and locking type. Knowing these keys allows you to select the complete unit or the replacement insert.

These take-up bearing housings are used for belt tensioning in conveyors, fans, mills and agricultural machinery. They are also used on transmission chains in the food, textile and woodworking industries. In Argentina, they are common in processing plants, metalworking shops and material handling equipment. Their design allows the insert bearing to be mounted in a housing that slides to adjust tension, extending the life of belts and chains.

To select the take-up bearing housing, take into account the shaft diameter, the locking type of the insert (set screw, eccentric or adapter sleeve) and the environmental conditions. The insert seal must protect against dust and moisture; in humid environments or with frequent washdowns, choose inserts with more effective seals. Lubrication is permanent in most inserts, but at high temperatures or speeds it is advisable to verify the grease type. Aligning the housing with the belt or chain is critical to avoid side loads.

NSK UKT take-up bearing housings can be interchanged with units from other manufacturers that follow the same dimensional nomenclature. If the customer brings a code from another brand, at MR Accesorios Industriales we quote it and, if necessary, indicate the compatible alternative. Interchangeability is based on the housing and insert dimensions, not on the brand. It is always advisable to verify the shaft diameter and the locking type before replacing a unit.

To request a quote for the UKT take-up bearing housing with NSK insert bearing you need, send the complete code by WhatsApp to MR Accesorios Industriales. If you have doubts about the designation, send us a photo or the code engraved on the part. We quote the exact code or size you request. We are in Buenos Aires, Argentina, and we respond promptly.

This description provides guidance on the product type. Check the configuration and dimensions of this reference.