Flange bearing 4 holes NSK UKFX13D1;HS2313X

NSK UKFX13D1;HS2313X is a reference of flange bearing 4 holes, within Bearing housings. Request a quote for UKFX13D1;HS2313X via WhatsApp or email with the quantity you need; we respond promptly with the quote and equivalents.

The NSK UKFX series Y-bearing with insert bearing is a 4-bolt flange unit that combines an insert bearing with a cast iron housing. It is used to mount rotating shafts on flat structures, where the flange is fixed with four bolts and the insert bearing is secured with a taper bushing. It is a compact and quick-mounting solution for transmission and conveying equipment in industrial plants.

The UKFX designation identifies the series of 4-bolt flange units with insert bearing from the NSK line. Examples UKFX08D1, UKFX09D1 and UKFX13D1 show the base code followed by two digits indicating the shaft diameter: 08 for 40 mm, 09 for 45 mm and 13 for 65 mm. The D1 suffix corresponds to a sealing and insert design variant. The code HS2308X, HS2309X and HS2313X identifies the insert bearing with mounting sleeve, which is supplied together with the housing to facilitate fixing to the shaft.

These supports are used in belt conveyors, bucket elevators, mixers, fans and process equipment in the food, chemical and materials industries. In Argentina, they are common in milling plants, aggregate processing plants and packaging lines, where robust fixing and simple alignment are required. Their four-bolt flange allows mounting on plates or profile structures, and the insert with taper bushing simplifies adjustment on shafts without shoulders.

To select the support, take into account the shaft diameter, the type of load (radial, axial or combined) and environmental conditions. The insert seal protects against dust and moisture; if the equipment operates with frequent washdowns, it is advisable to verify the seal type. Assembly is done by tightening the taper bushing with the nut until the correct internal clearance is achieved, and then fixing the flange with the four bolts, verifying alignment and uniform tightening. Lubrication is done with lithium grease or the one recommended by the equipment manufacturer.

NSK UKFX supports are interchangeable with other brands that use the same flange standard and shaft diameter, such as SKF, FAG or NTN, as long as the flange dimensions and insert fixing system match. When replacing, compare the complete part number and flange dimensions; if the shaft is worn, the taper bushing can compensate for small differences. For an exact equivalence, it is best to provide the original part number.

If you need a UKFX support with insert bearing, write to us via WhatsApp with the part number or shaft size. At MR Accesorios Industriales we quote the exact reference and advise you so the assembly is right the first time. More than 80 years supporting Argentine industry.