NSK UKFX09D1;HS2309X flange bearing 4 holes

NSK UKFX09D1;HS2309X is a reference of flange bearing 4 holes, within Bearing housings. Request a quote for UKFX09D1;HS2309X via WhatsApp or email with the quantity you need; we respond promptly with the quote and equivalents.

The NSK UKFX series Y-bearing with insert bearing is a 4-bolt flange unit that combines an insert bearing with a cast iron housing. It is used to mount rotating shafts on flat structures, where the flange is fixed with four bolts and the insert bearing is secured with a taper sleeve. It is a compact, quick-mounting solution for transmission and conveying equipment in industrial plants.

The UKFX designation identifies the series of 4-bolt flange units with insert bearing from the NSK line. Examples UKFX08D1, UKFX09D1 and UKFX13D1 show the base code followed by two digits indicating the shaft diameter, according to the code. The D1 suffix corresponds to a sealing and insert design variant. The HS code that accompanies each assembly identifies the insert bearing with mounting sleeve, which is supplied together with the housing to facilitate fixing to the shaft.

These supports are used in belt conveyors, bucket elevators, mixers, fans and process equipment in the food, chemical and materials industries. In Argentina, they are common in milling plants, aggregate processing plants and packaging lines, where robust fixing and simple alignment are required. Their four-bolt flange allows mounting on sheet metal or profile structures, and the insert with taper sleeve simplifies adjustment on shafts without a shoulder.

To select the support, consider the shaft diameter, the type of load (radial, axial or combined) and the environmental conditions. The insert seal protects against dust and moisture; if the equipment operates with frequent washdowns, it is advisable to verify the type of seal. Mounting is done by tightening the taper sleeve with the nut until the correct internal clearance is achieved, and then fixing the flange with the four bolts, verifying alignment and uniform tightening. Lubrication is done with lithium grease or the grease recommended by the equipment manufacturer.

NSK UKFX supports are interchangeable with other brands that use the same flange standard and shaft diameter, such as SKF, FAG or NTN, provided the flange dimensions and insert fixing system match. When replacing, compare the complete part number and flange dimensions; if the shaft is worn, the taper sleeve can compensate for small differences. For an exact equivalent, it is best to provide the original part number.

If you need a UKFX support with insert bearing, write to us via WhatsApp with the part number or shaft size. At MR Accesorios Industriales we will quote the exact reference and advise you so the mounting is right the first time.