Flange bearing 4 holes NSK UKFS318D1;HA2318X

NSK UKFS318D1;HA2318X is a reference of flange bearing 4 holes, within Bearing housings. Request a quote for UKFS318D1;HA2318X via WhatsApp or email with the quantity you need; we respond promptly with the quote and equivalents.

The UKFS housing with NSK insert bearing is a 4-bolt flange mounted unit that combines a cast iron housing with a UK series insert bearing. It is used to support rotating shafts in equipment where firm mounting and simple assembly are required. The insert is secured to the shaft by means of a taper sleeve and a nut, which simplifies adjustment and disassembly. MR Accesorios Industriales sells this line for industrial applications in Buenos Aires, Argentina.

The UKFS designation reads as a family of flange housings with insert bearing. The letters UK identify the insert type, which is mounted on the shaft with a taper sleeve; the F indicates the 4-bolt flange; and the S corresponds to the housing series. The number that follows —for example, in UKFS317D1;HA2317X or UKFS318D1;HA2318X— indicates the housing size. The D1 suffix refers to design variants of the insert, and the HA code that accompanies the assembly identifies the mounting sleeve. Knowing these parts allows you to order the correct replacement.

These housings are chosen in food and beverage plants, material handling, mills, mixers and packaging lines, where shafts need flanged support and a certain self-aligning capability. In Argentina they are seen in continuous process equipment, conveyor belts and machine tools. The 4-bolt flange allows them to be fastened to metal structures or walls with a symmetrical bolt pattern, which provides stability against moderate radial and axial loads.

To select the housing, take into account the shaft diameter, the type of load and the environmental conditions. The insert with taper sleeve makes mounting and disassembly easier without damaging the shaft, but it requires a properly tightened nut and adequate lubrication. Check the alignment between housings and inspect the sealing: in dusty or humid environments, additional protection is advisable. Fastening to the structure must be firm to prevent vibrations that shorten bearing life.

As for equivalents, UKFS housings with UK insert correspond to other lines of 4-bolt flange mounted units that use a taper sleeve. If the customer brings the code of another brand, interchangeability can be checked by dimensions and mounting type. MR Accesorios Industriales sells the NSK brand and can advise on the replacement, always respecting the shaft and housing dimensions. This is not in-house manufacturing by MR, but a line the company distributes.

To request a quote for the UKFS housing with NSK insert bearing, send the complete code by WhatsApp, for example UKFS317D1;HA2317X or UKFS318D1;HA2318X, or indicate the shaft size and the flange type. MR Accesorios Industriales will reply shortly with the corresponding quote. If you need a specific variant, write to us with the model and we will quote it.