Flange bearing 4 holes NSK UKFS305D1;HE2305

NSK UKFS305D1;HE2305 is a reference of flange bearing 4 holes, within Bearing housings. Request a quote for UKFS305D1;HE2305 via WhatsApp or email with the quantity you need; we respond promptly with the quote and equivalents.

The UKFS housing with insert bearing is a 4-bolt flange mounted unit that combines a cast iron housing with an insert bearing of the spherical roller or ball type, depending on the series. It is used to support rotating shafts on metal structures, with the advantage of quick mounting and adapter sleeve mounting that simplifies setup. MR Accesorios Industriales sells this NSK line for industrial applications in Buenos Aires, Argentina.

The UKFS designation identifies the family of flange housings with insert bearing. In the example UKFS305D1;HE2305, the number 305 indicates the insert bearing size, the letter D1 indicates a design variant of the insert, and the code HE2305 corresponds to the tapered adapter sleeve that secures the bearing to the shaft. This combination allows mounting the unit on shafts without machined shoulders, which speeds up assembly and reduces preparation costs.

These housings are used in belt conveyors, bucket elevators, mixers, mills, packaging lines and process equipment in food, chemical and materials plants. In Argentina they are common in the oilseed, meatpacking and mining industries, where firm support and simple alignment on sheet metal or profile structures are required. The 4-bolt flange allows them to be fastened to walls or frames with a symmetrical load distribution.

To select the housing, check the shaft diameter and the type of mounting: the adapter sleeve requires a shaft with suitable tolerance and controlled tightening. Check the insert sealing according to the environment (dust, water, vapors) and choose a lubricant compatible with the operating temperature. During mounting, align the flange with the holes and tighten the bolts in a cross pattern to prevent deformation. Correct lubrication and periodic re-tightening of the adapter sleeve extend the life of the assembly.

NSK UKFS units can be interchanged with other brands that use equivalent designations, such as the SY or FY series from other manufacturers, as long as the shaft diameter, hole spacing and center height match. To find the equivalent, compare the main dimensions and the insert type. If you have another brand's code, at MR Accesorios Industriales we will indicate the compatible alternative.

To request a quote for the UKFS housing with insert bearing you need, send the complete code via WhatsApp, for example UKFS305D1;HE2305, or indicate the shaft diameter and operating conditions. At MR Accesorios Industriales we will send you the quote shortly and advise you so that the unit fits your equipment.