Product page
Flange bearing 4 holes NSK UKFC211D1;HE2311XY
- Manufacturer Part Number
- UKFC211D1;HE2311XY
- Brand
- NSKBrand we market
- Category
- Bearing housings
- Subcategory
- Y-bearing unit
- Series
- UKFC
We respond promptly.
Request your quote via WhatsApp or email, with the quantity and time frame you need.
Can't find the exact model? Write to us with the part number or model you're looking for: we'll find it and quote it, even if it's not listed in the catalog.
Description
NSK UKFC211D1;HE2311XY is a flange bearing 4 holes reference, within Bearing housings. Request a quote for UKFC211D1;HE2311XY via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.
The UKFC housing with NSK insert bearing is a four-bolt flange unit that combines a cast iron housing and an insert bearing with an extended inner ring. It is used to support rotating shafts in equipment where quick mounting, good alignment and easy replacement are required. It is a common solution in light and medium-duty transmissions in Argentine industry.
The UKFC designation identifies the series of square flange housings with insert bearing. The number that follows indicates the shaft diameter: for example, UKFC211D1 corresponds to a housing for a 55 mm shaft, and HE2311XY is the mounting adapter that goes with that size. The D1 suffix refers to construction variants of the insert, while XY distinguishes the adapter with metric or inch thread as applicable. Knowing these codes allows you to order the exact replacement part.
These housings are used in belt conveyors, mixers, fans, centrifugal pumps, food machinery and packaging equipment. In Argentina they are common in grain processing plants, meat packing plants, tanneries and metalworking shops. The four-bolt flange makes mounting on sheet metal or profile structures easy, and the insert with extended ring simplifies fitting on the shaft without additional machining.
To select the housing, check the shaft diameter, the mounting type and the environmental conditions. The insert seal can be simple or with an additional lip seal for dusty or humid environments. Lubrication comes from the factory and should be checked according to the duty cycle. When mounting, align the flange with the holes and tighten the bolts evenly to avoid deformation that could affect the internal clearance of the bearing.
NSK UKFC housings are interchangeable with other brands that use the same nomenclature and standardized dimensions. If the original code is not available, it can be replaced by an equivalent unit from another manufacturer, respecting shaft dimensions, hole spacing and center height. MR Accesorios Industriales advises you to find the right equivalent without compromising equipment operation.
To request a quote for your UKFC housing with NSK insert bearing, send the complete code via WhatsApp. If you have doubts about the designation, send a photo of the part or the shaft and flange dimensions. At MR Accesorios Industriales we reply promptly with the option you need.
This description provides guidance on the product type. Check the configuration and dimensions of this reference.
Dimensions
Dimensions and tolerances: Send us the part number via WhatsApp and we'll confirm dimensions, sealing, and internal clearance against the manufacturer's data sheet.
Frequently Asked Questions
- What does UKFC mean in a housing with bearing?
- UKFC is the designation of a series of square flange housings with insert bearing. The letters UK indicate the type of insert with extended inner ring, and FC the housing shape. The number that follows indicates the shaft diameter in millimeters or inches depending on the system.
- How do I choose the right UKFC housing for my shaft?
- You need to measure the shaft diameter and check the flange hole spacing and the center height. With that data, you choose the corresponding UKFC code. If the shaft has special tolerances, ask us on WhatsApp and we will tell you the best option.
- Are NSK UKFC housings interchangeable with other brands?
- Yes, UKFC housings follow standardized dimensions, so they are usually interchangeable between brands that use the same nomenclature. Always check shaft dimensions, holes and center height. If you need an equivalent, send us the original code and we will help you find it.