Flange bearing 4 holes NSK UKFC210D1;HS2310

NSK UKFC210D1;HS2310 is a flange bearing 4 holes reference, within Bearing housings. Request a quote for UKFC210D1;HS2310 via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The UKFC housing with NSK insert bearing is a 4-bolt flanged mounted unit that combines a cast iron housing with a spherical roller insert bearing and an adapter sleeve. It is used to support shafts in belt, chain or coupling drives, where a robust front mounting and some self-aligning capability are required. MR Accesorios Industriales quotes it on WhatsApp with the full part number.

The UKFC designation reads as a family of flanged housings with insert bearing. The letters UK indicate that the insert is mounted on an adapter sleeve; FC defines the square 4-bolt flange. The number that follows —206, 207, 210, 211, 212 in the examples— indicates the insert size and therefore the shaft diameter. The D1 suffix corresponds to the design variant of the insert. The sleeve is ordered separately with its own part number: HS2306, HS2307, HS2310, HS2311 and HS2312 accompany the sizes above. To request a quote, send both part numbers together.

These housings are seen in food and beverage plants, material handling, steelmaking, paper and water treatment, among other Argentine industries. They appear in belt conveyors, bucket elevators, mixers, fans and packaging lines. The 4-bolt flange allows mounting on sheet metal or structure with a flat surface and distributes the load over four points. The insert with adapter sleeve makes mounting on commercial shafts easy without machining shoulders, which is useful when replacing an existing unit.

To choose correctly, check the shaft diameter and the flange hole spacing. The adapter sleeve must be the size corresponding to the insert: do not mix series. The insert seal protects against dust and splashes; if the environment has water or fine particles, additional protection is advisable. Lubrication comes from the factory, but in service it is advisable to check the condition of the grease and the axial clearance. When mounting, rest the flange on a clean, flat surface, tighten the bolts in a cross pattern and check that the shaft turns without effort.

UKFC units from different brands share flange dimensions and shaft diameters for the same size, but suffixes and tolerances may vary. If the customer brings the part number of another brand or an unidentified part, at MR Accesorios Industriales we indicate the compatible equivalent. The brand does not need to match: what matters is the insert size, the sleeve type and the hole arrangement. With that data, the replacement is direct.

If you need a UKFC housing with NSK insert bearing, send the full part number by WhatsApp to MR Accesorios Industriales. You can also ask about the associated HS sleeves. We quote the part number or the exact size you request and reply promptly.

This description provides guidance on the product type. Check the configuration and dimensions of this reference.