Product page
Flange bearing 4 holes NSK UKFC209D1;HS2309X
- Manufacturer Part Number
- UKFC209D1;HS2309X
- Brand
- NSKBrand we market
- Category
- Bearing housings
- Subcategory
- Y-bearing unit
- Series
- UKFC
We respond promptly.
Request your quote via WhatsApp or email, with the quantity and time frame you need.
Can't find the exact model? Write to us with the part number or model you're looking for: we'll find it and quote it, even if it's not listed in the catalog.
Description
NSK UKFC209D1;HS2309X is a flange bearing 4 holes reference, within Bearing housings. Request a quote for UKFC209D1;HS2309X via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.
The UKFC housing with NSK insert bearing is a 4-bolt flange unit that combines an insert bearing with a cast iron housing. It is used to support rotating shafts on flat structures, with front mounting and fastening by means of four screws. It is a compact solution with easy alignment for equipment that requires rigidity and protection against contaminants.
The UKFC designation is read as a family of flange housings with insert bearing. The number that follows indicates the size: UKFC208D1 corresponds to a 40 mm shaft, UKFC209D1 to 45 mm and UKFC213D1 to 65 mm. The D1 suffix identifies sealing and insert design variants. In the examples, HS2308X, HS2309X and HS2313X are the associated inserts, with their own series and diameter nomenclature.
These units are used in conveyors, belts, elevators, mixers, fans and agricultural machinery. In Argentina they appear in food plants, cement plants, cold storage facilities and metalworking shops, where wall or structural sheet mounting simplifies installation and maintenance. Their four-bolt flange allows firm fastening and quick replacement of the insert without disassembling the housing.
To select one, check the shaft diameter and the type of load: radial, axial or combined. The insert seal must be chosen according to the environment: dust, moisture or frequent washdowns. During mounting, align the flange holes and tighten the screws in a cross pattern. Lubricate the insert according to the duty cycle and check the axial clearance. Correct alignment extends bearing life and prevents vibration.
UKFC housings are interchangeable between brands that use the same nomenclature and flange dimensions. If the customer brings the code from another brand, the equivalent can be found by shaft dimensions, hole spacing and outer diameter. MR Accesorios Industriales sells the NSK line and can guide you on the substitution, always respecting the original tolerances and seal type.
To request a quote for the UKFC housing with NSK insert bearing, send the full code on WhatsApp, for example UKFC208D1 or HS2308X, or the shaft and flange dimensions. At MR Accesorios Industriales we will reply shortly with the alternative you need.
This description provides guidance on the product type. Check the configuration and dimensions of this reference.
Dimensions
- Eje o agujero
- 1-5/8 in
Frequently Asked Questions
- What does UKFC mean on a housed bearing unit?
- UKFC identifies a 4-bolt flange unit with insert bearing. The following number indicates the shaft diameter: UKFC208 for 40 mm, UKFC209 for 45 mm. The D1 suffix indicates sealing and insert design variants.
- How do I choose the right UKFC housing for my application?
- Define the shaft diameter, the type of load and the environmental conditions. Check whether you need a reinforced seal for dust or moisture. The flange must match the structure where it is mounted. With that data, we will quote the exact code.
- Can I replace a housing from another brand with an NSK UKFC?
- Yes, if the flange dimensions and the shaft diameter match. Interchangeability is based on standardized dimensions. Send the code of the original part or the dimensions and we will indicate the corresponding NSK equivalent.