NSK UKFC205D1;HE2305 flange bearing 4 holes

NSK UKFC205D1;HE2305 is a reference of flange bearing 4 holes, within Bearing housings. Request a quote for UKFC205D1;HE2305 via WhatsApp or email with the quantity you need; we respond promptly with the quote and equivalents.

The 4-bolt flange Y-housing with insert bearing from the UKFC series is an assembled unit that combines a cast iron housing with an insert bearing secured by set screws. It is mounted on the face of a machine or structure and allows the shaft to rotate supported at four anchoring points. It is a practical solution for equipment where the housing is bolted to a flat surface and the shaft is perpendicular to that face.

The UKFC series designation is read in blocks: the letters UK identify the insert bearing with tapered bore and adapter sleeve, FC corresponds to the 4-bolt flange housing and the number that follows indicates the nominal shaft diameter. The suffix D1 indicates construction variants of the insert, such as the sealing or the shape of the outer ring. A typical example is UKFC205D1, which combines the FC housing with the UK insert and the HE2305 sleeve to secure it on the shaft.

These housings are used in belt conveyors, bucket elevators, mixers, blowers, packaging lines and water treatment equipment. In the Argentine market they appear frequently in food, chemical and aggregate plants, where flange mounting simplifies alignment and replacement. They are also chosen in machines where the shaft must be centered with respect to a machined face and there is no space for a pillow block housing.

To select the assembly, take into account the shaft diameter, the insert fastening type and the working environment. The sealing of the insert bearing determines whether it is suitable for dust, humidity or frequent washdowns. Lubrication is done through the insert channel and should be renewed according to the duty cycle. During mounting, rest the flange on a clean, flat surface, tighten the four bolts in a cross pattern and check shaft alignment before starting up.

Y-housings with insert bearing are available in several brands and lines, and equivalences are established by the combination of housing, insert and shaft diameter. If you bring the code of another brand, at MR Accesorios Industriales we will indicate the compatible alternative. If the part has no identification, send us the shaft and flange hole measurements and we will quote it.

To request a quote for your UKFC housing, write to us on WhatsApp with the complete code, for example UKFC205D1 with its HE2305 sleeve, or with the shaft and flange measurements. At MR Accesorios Industriales we will send you the quote promptly.