Flange bearing 4 holes NSK UKF322D1;H2322X

NSK UKF322D1;H2322X is a flange bearing 4 holes reference, within Bearing housings. Request a quote for UKF322D1;H2322X via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The UKF housing with NSK insert bearing is a 4-bolt flange mounted unit that combines a cast iron housing with a spherical roller insert bearing and a mounting adapter sleeve. It is used to support shafts in belt, chain or coupling drives, where front mounting and a certain self-aligning capability are required. MR Accesorios Industriales sells this line to plants and workshops throughout Argentina.

The UKF designation is read as follows: UK indicates that the insert bearing is tapered and secured with an adapter sleeve; F corresponds to the 4-bolt flange. The number that follows (205, 206, 207…) defines the size of the bearing and the housing. In the examples UKF205D1;H2305X, UKF206D1;H2306X or UKF210D1;H2310X, the D1 suffix identifies sealing or internal design variants, and the code H2305X, H2306X, H2310X is the mounting adapter sleeve that accompanies each unit. The UKF series covers shafts from 20 mm to 60 mm, with standardized dimensions.

These housings are used in belt conveyors, bucket elevators, mixers, screens and packaging lines. Also in irrigation equipment, mills and animal feed plants, where the environment has dust or moisture. In Argentina they are common in the oilseed, meatpacking and mining industries, and in maintenance workshops that replace worn units. The 4-bolt flange allows mounting on sheet metal or profile structure, with the shaft perpendicular to the mounting surface.

To select the unit, start from the shaft diameter and the type of H sleeve you need. Check the alignment between housings: although the insert has a spherical seat, excessive misalignment shortens the seal life. Lubrication is with general-purpose lithium grease; in humid environments, choose D1 sealing or additional seals. The sleeve is tightened with a lock nut and lock washer, and the internal clearance is adjusted according to the diameter. During assembly, tighten the flange bolts in a cross pattern and check that the shaft turns freely.

UKF units are interchangeable between brands that follow the 4-bolt flange housing standard. If the customer brings a part number from another brand, it can be cross-referenced by shaft diameter and sleeve type. H sleeves are also standardized, so an H2308 from one brand fits a UKF208 housing from another. To confirm the equivalent, send the complete part number or the shaft measurements and the distance between holes.

If you need a UKF housing with NSK insert bearing, write to us on WhatsApp with the part number or the shaft diameter. At MR Accesorios Industriales we quote the complete unit or the sleeve separately, and we tell you the compatible alternative if needed. We serve industries and workshops in Buenos Aires, Argentina, and ship nationwide.

This description provides guidance on the product type. Check the configuration and dimensions of this reference.