NSK UKF316D1;H2316X flange bearing 4 holes

NSK UKF316D1;H2316X is a reference of flange bearing 4 holes, within Bearing housings. Request a quote for UKF316D1;H2316X via WhatsApp or email with the quantity you need; we respond promptly with the quote and equivalents.

The UKF housing with NSK insert bearing is a 4-bolt flange mounted unit that combines a cast iron housing with a spherical roller insert bearing and a mounting adapter sleeve. It is used to support shafts in belt, chain or coupling drives, where front mounting and some self-aligning capability are needed. MR Accesorios Industriales sells this line for plants and workshops throughout Argentina.

The UKF designation is read as follows: UK indicates that the insert bearing has a taper and is fixed with an adapter sleeve; F corresponds to the 4-bolt flange. The number that follows (205, 206, 207…) defines the size of the bearing and housing. In the examples UKF205D1;H2305X, UKF206D1;H2306X or UKF210D1;H2310X, the suffix D1 identifies sealing or internal design variants, and the code H2305X, H2306X, H2310X is the adapter sleeve that accompanies each unit. The UKF series covers a range of standard shaft diameters.

These housings are used in belt conveyors, bucket elevators, mixers, screens and packaging lines. Also in irrigation equipment, mills and animal feed plants, where the environment has dust or humidity. In Argentina they are common in the oilseed, meatpacking and mining industries, and in maintenance workshops that replace worn units. The 4-bolt flange allows mounting on sheet metal or profile structure, with the shaft perpendicular to the mounting surface.

To select the unit, start from the shaft diameter and the type of H sleeve you need. Check the alignment between housings: although the insert has a spherical seat, excessive misalignment shortens the seal life. Lubrication is with general-purpose lithium grease; in humid environments, choose the D1 seal or additional retainers. The sleeve is tightened with a lock nut and lock washer, and internal clearance is adjusted according to the diameter. During mounting, tighten the flange bolts in a cross pattern and check that the shaft turns freely.

UKF units are interchangeable between brands that follow the 4-bolt flange housing standard. If the customer brings a code from another brand, it can be cross-referenced by shaft diameter and sleeve type. H sleeves are also standardized, so an H2308 from one brand works in a UKF208 housing from another. To confirm the equivalence, send the complete code or the shaft dimensions and the distance between holes.

If you need a UKF housing with NSK insert bearing, write to us on WhatsApp with the code or shaft diameter. At MR Accesorios Industriales we quote the complete unit or the sleeve separately, and we indicate the compatible alternative if needed. We serve industries and workshops in Buenos Aires, Argentina, and ship throughout the country.