Insert bearing NSK UK210D1;HS2310

NSK UK210D1;HS2310 is a insert bearing reference, within Bearings. Request a quote for UK210D1;HS2310 via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The NSK UK series insert bearing is a ball bearing with an extended inner ring and 1:12 taper, secured to the shaft by an HS series adapter sleeve. It is used in split plummer block housings and bearing units to transmit moderate radial and axial loads. It is a practical solution for power transmission equipment, conveying and general machinery, where simple mounting and good sealing against contaminants are required.

The UK series designation reads as follows: the letters UK identify the insert bearing with taper, the first number indicates the diameter series (UK2 for series 2, UK3 for series 3) and the following two digits correspond to the shaft diameter in the metric system. The D1 suffix indicates a design variant with improved seals and flingers. The HS adapter sleeve is selected according to the shaft diameter: for example, UK206D1 is mounted with HS2306, UK210D1 with HS2310 and UK307D1 with HS2307. This combination allows the bearing to be secured onto cylindrical shafts without special machining.

In Argentine industry, these inserts are found in belt conveyors, bucket elevators, mixers, mills, packaging lines and equipment for the food or cement sectors. They are also used in agricultural machinery, such as seeders and combine harvesters, and in aggregate processing plants. Their ability to withstand slight misalignment and their sealing make them suitable for environments with dust or moderate humidity. MR Accesorios Industriales sells this line for replacement and new projects throughout the country.

To select the insert, take into account the shaft diameter, the expected radial and axial load, and the environmental conditions. The D1 sealing with seal and flinger protects against dust and splashes; if frequent washdowns occur, additional seals should be evaluated. The standard internal clearance is suitable for normal applications; for high temperatures or combined loads, consult variants. Mounting with the HS adapter sleeve requires cleaning the taper, fitting the lock nut and lock washer, and tightening with the appropriate wrench. Factory lubrication is usually sufficient, but in continuous service relubrication according to the duty cycle is recommended.

As for equivalents, tapered insert bearings are interchangeable between brands while keeping the series and shaft diameter: a UK210 from another manufacturer can replace the NSK UK210D1 if the dimensions and the locking type are respected. The HS adapter sleeve is also interchangeable between manufacturers that follow the standard. If the customer brings in an unidentified part, we can compare dimensions and find the right equivalent. It is always advisable to verify the shaft diameter and the sleeve pitch before replacing.

If you need an NSK UK series insert bearing, write to us on WhatsApp with the full part number or the shaft dimensions. At MR Accesorios Industriales we quote the exact reference and indicate the corresponding HS adapter sleeve. We can also advise you on lubrication and mounting so the repair goes right the first time.

This description provides guidance on the product type. Check the configuration and dimensions of this reference.