Pillow block bearing NSK UCUP205-013D1

NSK UCUP205-013D1 is a pillow block bearing reference, within Bearing housings. Request a quote for UCUP205-013D1 via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The UCUP2 pillow block with NSK insert bearing is a mounted unit that combines a pillow block housing with a UC series insert bearing. It is used to support rotating shafts in installations where the mounting base sits parallel to the shaft, with two mounting holes. It is a common solution in power transmission, conveying and process equipment where a robust, easy-to-align unit is required. MR Accesorios Industriales quotes the exact part number you need.

The UCUP2 designation reads as follows: UC identifies the insert bearing with set screws, UP the two-bolt pillow block housing, and 2 the size series. The suffixes after the number indicate sealing and locking variants: for example, in UCUP201D1 the suffix D1 indicates a version with a contact seal; in UCUP201-008D1 the hyphen with three digits corresponds to the shaft diameter in inches. The examples UCUP202-009D1, UCUP203-011D1 and UCUP204-012D1 show how the base number changes with shaft size. To choose, send us the full part number.

These pillow blocks are used in belt conveyors, bucket elevators, mixers, mills, packaging lines and process lines in food, chemical and materials plants. In Argentina they are common in grain handling equipment, feed plants and irrigation systems. The pillow block unit allows the shaft to be mounted on a horizontal surface, with the advantage that the insert bearing self-aligns inside the housing and absorbs small misalignments. They are also chosen in applications where access for lubrication is limited.

To select the UCUP2 pillow block, take into account the shaft diameter, the type of load (radial, axial or combined) and the environmental conditions. The insert seal defines the protection against dust, water or cleaning agents: suffixes with D1 usually incorporate contact seals that retain grease and slow the ingress of contaminants. During mounting, check that the base seats without deforming, align the holes and tighten the insert set screws onto the shaft with the appropriate wrench. Periodic lubrication with quality grease and checking clearance prevent premature failures.

UCUP2 pillow blocks with insert bearing are interchangeable between brands that make equivalent units, as long as the main dimensions match: shaft diameter, hole spacing, height to center and locking type. If you bring an unidentified part or another brand's part number, at MR Accesorios Industriales we tell you the compatible equivalent. The NSK UCUP2 series is sold in different sizes and sealing variants, and MR quotes the exact part number or size you need.

MR Accesorios Industriales sells the NSK line of pillow blocks with insert bearing for plants and workshops throughout the country. If you already have the part number UCUP201D1, UCUP202-009D1 or any other in the series, send it by WhatsApp and we will quote it shortly. You can also ask us about shaft sizes in millimeters or inches and we will tell you the corresponding reference. With more than 80 years in the field, at MR we resolve the technical inquiry and get you the part your equipment needs.

This description provides guidance on the product type. Check the configuration and dimensions of this reference.