NSK UCCX11D1 cartridge bearing

NSK UCCX11D1 is a reference of cartridge bearing, within Bearing housings. Request a quote for UCCX11D1 via WhatsApp or email with the quantity you need; we respond promptly with the quote and equivalents.

The UCCX housing with NSK insert bearing is a cartridge unit ready to mount in cylindrical housings. It consists of an insert bearing with an extended inner ring and an outer ring with a spherical surface that fits into a cast iron housing. It is used in equipment where rotating shafts need to be supported with simple alignment and efficient sealing. MR Accesorios Industriales sells this line in Buenos Aires, Argentina, with technical advice to select the correct size.

The UCCX designation is read as a family of cartridge units: the acronym identifies the housing type and the number that follows indicates the shaft diameter and size. Examples UCCX05-013D1, UCCX05-014D1 and UCCX05-015D1 show variants within the same base size, while UCCX05D1, UCCX06-101D1 and UCCX06-102D1 correspond to other sizes. The D1 suffix indicates construction features specific to the series, such as the sealing type and insert configuration. To choose, simply indicate the full part number or the shaft and housing dimensions.

These units are used in conveyors, belts, elevators, mixers and process equipment in the food, chemical, cement and material handling industries. In Argentina, they are common in food and beverage plants, where cleanliness and sealing are critical, and in agricultural and industrial applications that require quick mounting and simple maintenance. Their cartridge design allows the assembly to be installed in a machined cylindrical housing, which simplifies replacement and reduces downtime.

To select correctly, consider the shaft diameter, outer diameter and housing width. Verify that the mounting surface is clean and free of burrs, and that the housing has the proper tolerance to avoid deformation. The insert seal should be chosen according to the environment: for dust or moisture, a reinforced seal is advisable. Lubrication comes from the factory, but under severe conditions it may require periodic replenishment. Alignment between shafts is essential to avoid undue axial loads and extend service life.

NSK UCCX units can be interchanged with other brands that follow the same mounting standard, such as the UC or UCC series from different manufacturers. Interchangeability depends on the housing dimensions and shaft diameter, not only on the part number. If the customer brings an unidentified part or another brand's part number, at MR Accesorios Industriales we will indicate the compatible alternative. It is always advisable to verify critical dimensions before replacing.

To request a quote for your UCCX housing with NSK insert bearing, send the full part number or the shaft and housing dimensions via WhatsApp. At MR Accesorios Industriales we will respond promptly with the option you need. We can also advise you if you have questions about the proper sealing or lubrication for your application.