Insert bearing NSK UC202D1

NSK UC202D1 is a insert bearing reference, within Bearings. Request a quote for UC202D1 via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The NSK UC2 series insert bearing is a ball bearing with a spherical outer ring and set screws, designed to be mounted in split or solid housings. It is used in equipment where the shaft rotates and needs flexible alignment, such as conveyor belts, mixers or fans. MR Accesorios Industriales sells this series in Buenos Aires, Argentina, and quotes it on WhatsApp with the exact part number.

The UC2 series designation is read as follows: UC indicates an insert bearing with set screws, 2 corresponds to the shaft diameter in inches (16 mm for UC201, 17 mm for UC202, etc.), and the D1 suffix indicates a manufacturer's sealing and tolerance variant. For example, UC201-008D1 has a shaft diameter of 1/2 inch, while UC201D1 is the same size in millimeters. The -008 suffix in codes with a hyphen identifies the size in inches. With this data you can choose the insert that corresponds to your shaft.

These bearings are used in the food, chemical, textile and transport industries in Argentina. They are mounted in split or flange housings for conveyor belt shafts, bucket elevators, mixers, dryers and fans. Their spherical outer ring compensates for small misalignments between the housing and the shaft, which simplifies mounting and reduces maintenance in equipment with vibrations or moderate loads.

To select the insert, take into account the shaft diameter, the housing type and the environmental conditions. The D1 sealing protects against dust and moisture, but if there are frequent washdowns or exposure to liquids, it is advisable to verify the seal type. The set screws must be tightened with the right wrench and with clean threads; poor locking causes premature wear. Factory lubrication is usually sufficient, but in demanding applications relubrication with compatible grease is recommended.

As for equivalents, UC2 insert bearings from different brands share main dimensions, but the sealing, set screws or surface treatment may vary. If you bring another brand's part number or an unidentified part, at MR Accesorios Industriales we will indicate the compatible alternative. We do not invent part numbers: we work with the exact designation shown on the housing or on the old bearing to ensure the correct replacement.

If you need an NSK UC2 series insert bearing, write to us on WhatsApp with the part number or the shaft size. We will quote it shortly and arrange delivery in Buenos Aires, Argentina. We can also advise you if you have questions about mounting or lubrication. MR Accesorios Industriales has more than 80 years of experience in bearings and power transmission.

This description provides guidance on the product type. Check the configuration and dimensions of this reference.