Deep groove ball bearing NSK MF 104 BZZ

NSK MF 104 BZZ is a deep groove ball bearing reference, within Bearings. Request a quote for MF 104 BZZ via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The NSK deep groove ball bearing of the MF BZZ series is a single row bearing with shield plates on both sides. It is used to support moderate radial and axial loads in equipment where a compact solution protected against contamination is needed. Its reduced section design makes it suitable for applications with limited space, such as small motors, fans and power tools. At MR Accesorios Industriales we quote it on WhatsApp with the complete part number.

The MF BZZ series designation reads as follows: MF indicates that it is a deep groove ball bearing of extra reduced section, with a smaller outside diameter than that of the 60 series. The numbers that follow, as in MF 52 BZZ or MF 104 BZZ, correspond to the size code that defines the dimensions. The B suffix indicates that the bearing has a particular internal design, and ZZ indicates that it has metal shield plates on both sides. These plates prevent the entry of dust and particles, although they are not hermetic seals.

In Argentine industry, bearings of the MF BZZ series are found in applications where space is critical: small electric motors, cooling fans, low-power centrifugal pumps, portable power tools and instrumentation equipment. They are also used in textile machines, industrial printers and light transmission systems. Their compact size and protection against contaminants make them suitable for environments with moderate dust, provided proper alignment and lubrication are maintained.

To correctly select an MF BZZ bearing, take into account the radial and axial load it will support, the rotation speed and the environmental conditions. The ZZ plates are appropriate for dusty environments, but if there is moisture or liquids, it is advisable to evaluate a more effective seal. Mounting must be done with suitable tools, avoiding direct blows on the plates. Factory lubrication is usually sufficient for the service life of the bearing under normal conditions, but in demanding applications periodic relubrication may be required.

If you need to replace a bearing from another brand, the NSK MF BZZ series has equivalents in other manufacturers' catalogues. What matters is comparing the main dimensions (bore, outside diameter and width) and the type of protection. It is not enough for the code to be similar: the load capacity and internal clearance must be verified. At MR Accesorios Industriales we advise you to find the correct equivalence and we quote the exact part number you need.

To request a quote for your NSK MF BZZ bearing, send us the complete part number on WhatsApp. At MR Accesorios Industriales we quote it promptly. If you have doubts about the designation or need a compatible alternative, write to us with the model or the dimensions and we will indicate the option that best suits your equipment.

This description provides guidance on the product type. Check the configuration and dimensions of this reference.